CRIMPING | PRODUCTION | FP170 FINN'POWER FP 170 STANDARD FEATURES Adapter dies for FP160-series dies (part no 404916) Foot pedal (part no 691563) Pressure crimping ICC1 Step crimping ICC2 Please note that the images are for illustrative purposes only. The final product may vary in design, features or specifications. FP170 STRONG WITH WIDE OPENING ABSOLUTt QUALIT‘ )E IN INLAND FP170 machine is primarily designed for crimping large fittings and applications requiring large opening. FP170 is widely used in tube and pipe industry as well as electric insulators and several automotive applications. FP170 with extra long master dies provides long forming with single stroke. TECHNICAL DATA with master dies (mm/inch) Max. crimping force (tonnage) 660 Hydraulic hose size (inch) 10 * Industrial hose size (inch) 12.60 * Max. opening without dies (mm) 475 Motor Power (kW/HP) 7.5/10 Adapter dies for 32-series dies (part no 302008) QuickChange-tool 32-series dies (part no 701049) Smart die rack SDR (16 slot for 32-series dies) Interface pack ETH (Communication TCP/IP & UDP) Pinning support mandrel Quality control ICC3 Graphical quality control ICC4 Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 Camera with 7” display Horizontal Back layout HB Horizontal Side layout HS ** Will have impact on motor size, hydraulic unit dimensions and weight DieSetNo D (mm) L (mm) Crimp. range (mm) DIMENSIONS (LxWxH) Machine (mm) Hydraulic Unit (mm) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Hydraulic Unit 1) With standard dies. Crimping range can be increased with special dies. Theoretical with 10 mm cycle. 3) With adapter dies 4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. DieSetNo D (mm) L (mm) Crimp. range (mm) DieSetNo D (mm) L (mm) Crimp. range (mm) Power supply cable not included. In addition to the standard die sets, a wide range of special die sets is available on request.