FP145 Big brother of the famous FP120 with more force, bigger opening and larger dies. The 140-series die system with adaptor dies makes an excellent choice for large, medium and even small size fittings. FP145 is an ideal machine for 2” 6-wire hoses and also for medium range industrial hoses. FP145 is available with separate hydraulic unit or as a compact model. With separate hydraulic unit, access to the back side of the machine is free, when part feeding from the back is needed. TECHNICAL DATA with master dies (mm/inch) Max. crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max. opening without dies (mm) Motor Power (kW/HP) DIMENSIONS (LxWxH) Machine (mm) Hydraulic Unit (mm) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Hydraulic Unit ABSOLUT! QUALIT“)E IN INLAND 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. ■ 3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. Power supply cable not included. STANDARD FEATURES QuickChange-tool for 32-series dies (part no 701049) Electric backstop device (part no 705183) Adapter dies for 32-series dies (part no 704631) The same part goes for right and left. Pressure crimping (ICC only) Step crimping Foot pedal (part no 691563) Side table (part no: 719216 (right), 719152 (left) Side die rack, 5 slots (Compact only) (part no 717685) Die rack, 9 slots (part no: 721486) The same part goes for right and left. Mechanical back stop device (part no 704920) Interface pack ETH (Communication TCP/IP & UDP) Oil cooler J3 ** Pinning support mandrel Horizontal Back layout HB Horizontal Side layout HS ** Will have impact on motor size, hydraulic unit dimensions and weight (8 or 16 slot model available for 32-series dies) Graphical quality control ICC4 Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 A3 signal Camera with 7” display ** Will have impact on motor size, hydraulic unit dimensions and weight. DieSetNo D (mm) L (mm) Crimp. range (mm) DieSetNo D (mm) L (mm) Crimp. range (mm) In addition to the standard die sets, a wide range of special die sets is available on request.