CONTROL ICC (7” touchscreen) or SCC (5” touchscreen) STANDARD FEATURES QuickChange-tool (part no 701049) Electric backstop device (part no 705183) Mirror (part no 054010) Die racks (part no: 721486) The same part goes for right and left. Adapter dies for 32-series dies (part no 703772) Pressure crimping (ICC only) Step crimping POWERFUL BUT VERSATILE Big brother of the famous FP120 with more force, bigger opening and larger dies. The 140-series die system with adaptor dies makes an excellent choice for large, medium and even small size fittings. Great machine also for medium range industrial hoses. TECHNICAL DATA Max crimping dia (mm/inch) 1) Max crimping dia with master dies (mm/inch) Max. crimping force (tonnage) Hydraulic hose size (inch) Industrial hose size (inch) Max. opening without dies (mm) Motor Power (kW/HP) Machine (inch) Hydraulic Unit (inch) WEIGHT (KG/LBS) Machine Hydraulic Unit ** Will have impact on motor size, hydraulic unit dimensions and weight OPTIONS (ICC ONLY) Smart die rack SDR (8 or 16 slot model available) Quality control ICC3 Graphical quality control ICC4 Auto greasing G3 Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 A3 signal Camera with 7” display ** Will have impact on motor size, hydraulic unit dimensions and weight. Side die rack as an option, 5 slots (Compact only) DIMENSIONS (LxWxH) Machine (mm) Foot pedal (part no 691563) Side table (part no: 719216 (right), 719152 (left) Side die rack, 5 slots (Compact only) (part no 717685) Die rack, 9 slots (part no: 721486) The same part goes for right and left. Mechanical back stop device (part no 704920) Interface pack ETH (Communication TCP/IP & UDP) Oil cooler J3 ** Combi unit (crimping and hydraulic unit combined) Pinning support mandrel Horizontal Back layout HB Horizontal Side layout HS 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on reque