RELIABLE SOLUTION FOR AUTOMATED LINES CC22 comes in both a table-top or ergonomic Z-configuration. The CC22 is built for Serial Production use. By design, the constant centerline crimping enables easy part-positioning. Standard Z-model The Z-configuration, with the crimping head and hydraulic unit all separate, makes the CC22 ideal for automatic line use. For automation it can be equipped with an optional Automatic Greasing Unit, enabling an interruption-free operation combined with long maintenance intervals and ensuring ultimate accuracy. TECHNICAL DATA Max crimping dia (mm) 1) Max crimping force (tonnage) Industrial hose size (mm/inch) STANDARD FEATURES Electric backstop device (part no 691562) Pressure crimping ICC1 Step crimping ICC2 OPTIONS QuickChange-tool (part no 691043) Foot pedal (part no 691563) Tool table with QuickChange-tool (part no 714065) Mechanical back stop device (part no 691562/P51MS) Quality control ICC3 Graphical quality control ICC4 Auto greasing G3 Interface pack ETH (Communication TCP/IP & UDP) A3 signal Bar Code Reader BCR Max opening without dies (mm) Motor Power (kW/HP) DIMENSIONS (LxWxH) Machine (mm) CC22 Crimping head (inch) CC22Z Hydraulic unit (inch) CC22Z 1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle. 3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. In addition to the standard die sets, a wide range of special die sets is available on request.