Product for the elevator industry 2019
16Pages

Smart encoders & actuators Products for the elevator industry 2019

Since its inception in 1982, Lika Electronic develops and manufactures incremental and absolute, optical and magnetic, rotary and linear encoders, incremental & absolute sensors, linear and rotary incremental & absolute magnetic measurement systems, integrated positioning units, displays & position controllers. Thanks to a wide range of technical engineering skills and in-depth knowledge and expertise in digital and analogical electronic design, software development & mechanical and optical components design, all managed inside the company, Lika Electronic is able to translate the...

Moving Core of the elevator system is the motor used to raise and lower the elevator car. Traditionally a geared traction motor drives a gear-type reduction unit, which turns the hoisting sheave. While slower than a typical gearless elevator, the gear reduction offers the advantage of requiring a less powerful motor to turn the sheave. These elevators typically operate at speeds up to 2.5 m/s (500 ft/min) and carry loads of up to 14,000 kg (30,000 pounds). Gearless traction motor technology has brought about rapid changes within the elevator industry. A few reasons for its increased...

Positioning Perfect precision of levelling at landings is not only an unavoidable safety need, but also a specific requirement of lift directives. UNI EN 81-70 states that the stopping accuracy of the car shall be ± 10 mm (0.393”); while a levelling accuracy shall be maintained to ± 20 mm (0.787”). Even a small difference between the landing sill and the car sill can thus be unacceptable. Car position measurement systems play a fundamental role in fully satisfying these strict requirements. Lika Electronic offers simple, robust and affordable solutions, capable of resolutions down to 0.1 mm...

Encoders for gearless motors FEATURES Incremental feedback encoder for gearless motors Absolute feedback encoder for gearless motors • Cable output with PCB connector • Cable output with PCB connector • Tapered shaft (1:10) • Expansion flange for easy installation • Tapered shaft (1:10) • Expansion flange for easy installation OPTIONS • Customized connection cables • Customized connection cables APPLICATION • Feedback on gearless motors • Feedback on gearless motors Gearless motors require sturdy, vibration-resistant and compact encoders, especially in MRL installations. Lika Electronic has...

ASC85 SMRI + MRI FEATURES Absolute encoder for advanced motor feedback systems. High accuracy optical sensing. Incremental magnetic ring encoder • Line Driver • Cable output • Cable output • M12, M23 inline connector • M12 inline connector • 050 mm through hollow shaft • 0180 mm through hollow shaft • Connectors for all common lift controllers • Several ring diameters • Different sensor housings APPLICATION • Feedback on gearless motors •Feedback on gearless motors

Encoders for gear traction motors FEATURES Standard incremental encoder for elevators Solid and blind hollow shaft Hollow shaft encoder for direct installation on motors • Robust design for long lifetime • Cable or connector output • Universal output circuit • Robust die-cast housing • Low profile housing • Cable or M23 connector output • 1024, 2048, 2500, 4096, 5000 PPR • Other pulse rates available • 1024, 2048, 4096, 8192 PPR • Other pulse rates available • niversal output circuit (HTL+TTL) 5-30Vdc U • Push-Pull (HTL) 10-30Vdc • Line Driver (TTL) 5Vdc • Sine/cosine 1Vpp • niversal output...

FEATURES Encoder with REO interface Compact encoder for small lift motors Hollow shaft encoder for small lift motors • Cable output • Cable output, 7 or 10 m • Cable output, 7 or 10 m • Safe signal transmission up to 80 m cable • Inline connectors available • Inline connectors available • 1024 PPR • Universal output circuit (HTL+TTL) 5-30Vdc • 512, 1024, 2048, 4096 PPR other resolutions on request • Universal output circuit (HTL+TTL) 5-30Vdc • Push-Pull (HTL) 10-30Vdc • Line Driver (TTL) 5Vdc • 512, 1024, 2048, 4096, 8192 PPR other resolutions on request • Universal output circuit (HTL+TTL)...

SGSM • SGSD FEATURES Single or double bearingless encoder Absolute multiturn encoder with solid or blind Absolute multiturn encoder with solid or blind hollow shaft hollow shaft • Push-Pull • CANopen (DS406) • SSI interface • Line Driver • Cable output • Cable output • Cable output • Hollow shaft 014, 15 mm • Hollow shaft 014, 15 mm • Most common controller connectors available • Connectors for all common lift controllers • Connectors for all common lift controllers available available • Other shaft 0 with reduction sleeves • Other shaft 0 with reduction sleeves • Direct installation on...

Lift car & freight lift position measurement systems FEATURES Draw wire actuator for incremental or absolute encoders • Measurement range from 5 to 10 m (SFE • SFA) • Measurement range from 10 to 50 m (SAK • SBK) • esolution down to 0.1 mm (other resolutions on request) R • SFE with programmable incremental encoder • SFA with absolute encoder, SSI, analogue or CANopen • SAK and SBK in combination with: incremental encoders (I58) absolute SSI (EM58), absolute CANopen (AM58) • Cable or connector (depending on encoder) OPTIONS • Seawater-proof housing • Versions with ATEX encoder APPLICATION •...

FEATURES Compact hollow shaft incremental encoder Extra-reliable low-cost incremental encoder for lift doors • Universal output circuit (HTL+TTL) 5-30Vdc • Push-Pull (HTL) 10-30Vdc • Push-Pull (HTL) 10-30Vdc • Line Driver (TTL) 5Vdc • Cable output • Cable output • Hollow shaft 0 6, 8, 10 mm • Hollow shaft 0 9 mm • Other resolutions on request • Connectors for all common door controllers available • Connectors for all common door controllers available • Low-cost versions • Special fixing plates APPLICATION • Speed control on lifts & escalators • Door position control on high-end lifts...