Linear encoders with external converter •  Compact encoders with in-line external interpolator •  IP67 protection •  Resolution up to 5 μm ENVIRONMENTAL SPECIFICATIONS Shock: Vibrations: Protection: Operating temperature range: Storage temperature range: Dimensions: Housing material: Electrical connections: Gap between sensor/tape (without cover strip): see drawing die cast aluminium, UNI EN AC-46100 Lika Hi-flex cable M8, 2,0 m SMB2: 0,1 ÷ 1,0 mm SMB5: 0,1 ÷ 2,0 mm max 16 m/s Tape length -5 mm each side Travel speed (mechanical): Measurement length: ELECTRICAL SPECIFICATIONS Resolution: Sensor accuracy: Repeat accuracy: Output circuits: Output signals: Counting frequency: Power supply: Power consumption: Protection: 0,01 / 0,005 mm ±15 μm max. ±1 increment Line Driver, Push-Pull AB0 /AB0 acc. to edge distance setting +5Vdc ±5%, +10Vdc ÷ +30Vdc 70 mA against inversion of polarity (except 5Vdc version) and short-circuit acc. to EN 61000-6-2 level 3 Edge distance selection Resolution (µm) vs. max. possible speed (m/s) Order code Edge distance (µsec) Magnetic tape for SMB2 Magnetic tape for SMB5 Protection profile (10 pc

Order code - Sensor SMB2 SMB5 c POWER SUPPLY 1 = +5Vdc ±5% (L output circuit) 2 = +10Vdc ÷ +30Vdc (Y and YC output circuit) f CONNECTIONS L2 = cable output 2 m L5 = cable output 5 m Lx = cable output x m Y = Push-Pull (AB) YC = Push-Pull (AB, /AB) L = Line Driver (AB, /AB) g EDGE DISTANCE (see edge distance selection) H = 0,3 μs J = 0,5 μs A = 1 μs B = 2 μs (standard value) C = 4 μs e CONNECTIONS 0,5 = cable length between sensor and converter 0,5 m (others on request) h CUSTOM VERSION Order code - Magnetic tape MT20 MT50 d CUSTOM VERSION Specifications subject to changes without pr