video corpo

FLINT

FLINT

FLINT

Product catalog summary
Overview: The document provides detailed specifications and features of the FLINT femtosecond Yb oscillators, highlighting their advanced capabilities and robust design suitable for industrial applications.
Features:
  • Sub-40 fs pulse duration without additional compression.
  • 250 nJ pulse energy and 20 W output power.
  • Standard 76 MHz repetition rate with no amplified spontaneous emission.
  • Rugged mechanical design with automated second harmonic generation and optional Carrier Envelope Phase (CEP) stabilization.
  • Capability to lock to an external clock.
Specifications:
  • Models: FL1-02, FL1-08, FL1-SP, FL2-12, FL2-20, FL2-SP.
  • Max average power ranges from 2 W to over 20 W depending on the model.
  • Pulse duration varies from <100 fs to 30-50 fs.
  • Repetition rate is approximately 76 MHz, with other rates available.
  • Centre wavelength options range from 1026 nm to 1040 nm.
  • Output stability is <0.5% rms over 24 hours.
  • Physical dimensions vary by model, with specific measurements provided for laser head and power supply.
Environmental and Utility Requirements:
  • Operating temperature: 15-30 °C with recommended air conditioning.
  • Relative humidity: <80% non-condensing.
  • Electric requirements: 110 V AC or 220 V AC, with power consumption between 100 W and 150 W.
Safety and Additional Features:
  • Class 4 laser product with warnings to avoid exposure to laser radiation.
  • Optional equipment includes harmonics generator and CEP stabilization systems.
Performance and Stability:
  • Long-term harmonic lock stability tests and output power stability under harsh conditions are documented.
  • Graphs illustrate the optical spectrum, timing jitter, and phase noise characteristics.
See more

Catalog excerpts

FLINT-1

AUTOCORRELATORS | SPECTROMETERS | OPTICAL PARAMETRIC AMPLIFIERS | HARMONICS GENERATORS | OSCILLATORS | ULTRAFAST LASERS Femtosecond Yb Oscillators FEATURES ᰋ Sub‑40 fs without any additional pulse compressor ᰋ 250 nJ pulse energy ᰋ 20 W output power ᰋ 76 MHz is standard ᰋ No amplified spontaneous emission ᰋ Rugged, industrial-grade mechanical design ᰋ Automated second harmonic generator Typical view of FLINT model FL2 ᰋ Possibility to lock to external clock is immune to minor mechanical impact. Piezo-actuator can be implemented in customized oscillators in order to control the cavity length. FLINT oscillator can also be equipped with a Carrier Envelope Phase (CEP) stabilization system. The FLINT oscillator is based on Yb crystal pumped by a high brightness laser diode module. Generation of femtosecond pulses is provided by Kerr lens mode-locking. Once started, mode-locking remains stable over a long period of time and Pulse duration (assuming Gaussian pulse shape) Model Max. average power Repetition rate Centre wavelength Output pulse-to-pulse stability Linear, horizontal Beam quality Beam pointing stability Internal attenuator PHYSICAL DIMENSIONS Laser head Power supply and chiller rack Included. Different options are available ENVIRONMENTAL & UTILITY REQUIREMENTS Operating temperature Relative humidity Electric Rated power Power consumption ¹⁾ Depends on output power ~600 mW <40 fs; up to 2 W <50 fs. ²⁾ Other repetition rates are available in the range from 60 to 100 MHz. ³⁾ Other repetition rates are available in the range from 70 to 80 MHz. ⁴⁾ Choice of a particular central wavelength with ±1 nm tolerance is available upon request. ⁵⁾ With enabled power-lock, under stable environment. DANGER: VISIBLE AND/OR INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT, REFLECTED OR SCATTERED RADIATIO

 Open the catalog to page 1
FLINT-2

CARRIER ENVELOPE PHASE (CEP) STABILIZATION PHAROS oscillator can be equipped with piezo actuators for precise control of the cavity length. PHAROS oscillator can be equipped with nonlinear interferometer and feedback loop throughout the pump current of the laser diode bar for CEP stabilization. Integrated timing jitter, fs Single side power spectral density of fceo phase noise (in loop) and the integrated phase jitter. Laser oscillator (62.513 MHz) is locked to RF reference R&S SMB 100A (500.104 MHz). Measured integrated timing jitter* at 0.01 mHz – 600 kHz bandwidth is 110 fs Laser oscillator...

 Open the catalog to page 2

All Light Conversion catalogs and technical brochures

  1. HARPIA

    12  Pages

  2. ORPHEUS-ONE

    2  Pages

  3. CARBIDE

    10  Pages

  4. PHAROS

    10  Pages

Archived catalogs

  1. TOPAS-White

    6  Pages

  2. SHBC-TOPAS

    2  Pages

  3. HE-TOPAS

    2  Pages

  4. TOPAS-C

    4  Pages

  5. TiPA

    2  Pages

  6. Topas

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.