LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver Product Description LF-GDE075YV024 series is a 75W constant voltage LED driver with 0-10V/PWM/Rx dimming function. Input voltage: 220-240VAC; rated output voltage: 24V; rated output current: 3.125A. It is a reliable constant voltage LED driver with high efficiency and low THD, suitable for indoor LED strip. Features  IP20  Suitable for Class II light fixtures  Built-in active power factor correction function  0-10V/PWM/Rx dimming, dimming depth: 0.5%  Flicker free  Small size; high efficiency (typical value≥88%）  All-round protections: over voltage, over load, short circuit  5-year warranty (Please refer to the warranty condition.) Applications  LED strip  Luminous character  Light box Naming LF-GDE 075 YV 024 024: DC24V output voltage YV: constant voltage series 075: rated power 75W G: isolated circuit; DE: 0-10V/PWM/Rx dimming product www.lifud.com | Technical support: China (HQ

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver www.lifud.com | Technical support: China (HQ): +86 755 8373 9299

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver www.lifud.com | Technical support: China (HQ): +86 755 8373 9299

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver Characteristic Curve  PF Curve www.lifud.com | Technical support: China (HQ): +86 755 8373 9299

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver LiFOd Operations of Dimming ■ Definitions of Input/Output Terminals ■ Operations of 0-10V, PWM and Rx dimming - Connect the 0-10V, PWM or Rx signal to the DIM terminals. - In 0-10V dimming mode, when the input voltage<0.3V, the light will be turned off. when the input voltage>0.5V, the light will be turned on. - PWM signal range: 500-3000 (Hz); amplitude: 10 (V) - Rx range: 0-100KC - DIM+/- (no signal connection): 100% rated current - The minimum dimming depth is about 0.5% (output duty cycle)

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver Label INPUT LlFud Preparation for OUTPUT inputand output LED Driver Model: LF-GDE075YV024 Input:220-240V ^50/60Hz Max.0.6A OutputVoltage:24V ™ P rated:max,75W I rated: 0-3.125A ]g For Australia and New Zealand,the marking label with V*S Control Mode:Q-10V&Resistance&PWM Dimming Range:0%-100% For LED modules only www.lifud.com Made in China Dimensions (unit: mm ) Packaging Specification Model www.lifud.com | Technical support: China (HQ): +86 755 8373 9299

LF-GDE075YV024 Constant Voltage 0-10V/PWM/Rx Dimming Flicker-Free LED Driver Transportation & Storage  Transportation  Suitable transportation means: vehicles, boats and aircraft.  During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact.  Storage  Storage in accordance with the provisions of the Class I environment. For products which have been stored for more than six months, they mustn’t be used until they pass the re-inspection. Attention  Please use this product...