Compact DALI Dimmable NFC Constant Current LED Driver Product family features — DALI&PUSH dimmable — Dimming range: 1 to 100% — Output current tolerance: 1% — Up to 90% efficiency — Output voltage range: 9-42V — Low THD＜8% — Suitable for Class I/II light fixtures — 5 years guarantee Product family benefits — Advanced functions: EL, CorridorDIM, CLO — DALI-2 part ext. 251, 252 and 253 — Output current adjustable and parameter set via DALI programmer or NFC — 2 sets of L/N at the input convenient for multiple luminaires connected in parallel with large terminal for screw-free wiring — Comply with Zhaga Book13, 24 — Surge level: PUSH：1kV，L-N：2kV Typical applications — For spot light and panel light — For office, commercial and residential lighting Product parameters — Output current 500-1050mA

Electrical data Input data Rated supply voltage Mains frequency Power factor Output current tolerance Input current Inrush current Loading no. on circuit breaker 10 A (B) Loading no. on circuit breaker 10 A (C) Loading no. on circuit breaker 16 A (B) Loading no. on circuit breaker 16 A (C) Protective conductor current Power input on stand-by Output data Nominal output voltage Nominal output current Default output current Maximum output power Nominal output power Output ripple current (100 Hz) Complies with IEEE Std 1789-2015 Temperature tolerance Starting time Safety Withstanding voltage 1) t...

Characteristic diagram Operating Window Typical Efficiency vs Load Typical Power Factor vs Load

Independent Mounting hole spacing, length Product weight Cable cross-section, input side Cable cross-section, output side Wire preparation length, input side Wire preparation length, output side Colors & materials Casing material Casing color

Temperature & operating conditions Ambient temperature range Maximum temperature at tc test point Temperature range at storage -30℃ - +80℃ (6 months in Class I environment) Humidity range at storage Humidity during operation Atmospheric Pressure Tc point is at the top of LED driver Product Terminal Input DALI/PUSH dimming input Positive electrode output of LED driver DALI/PUSH dimming input Negative electrode output of LED driver AC live wire input AC neutral wire input Protective Characteristics Schematic Schematic diagram of input undervoltage protection Schematic diagram of input overvoltage...

Capabilities Dimmable DALI/PUSH dimmable Dimming range Overheating protection Overload protection Short-circuit protection Hiccup mode (Automatic reversible) No-load protection Suitable for fixtures with prot. class Programming interface Control interface Dimming Function Instruction • DALI dimming function Wiring diagram of DALI dimming ① Default setting brightness is 100%. ② Connect DALI signal to DA1 PUSH and DA2 PUSH. ③ DALI protocol includes Max.16 scene groups. ④ Maximum number of LED drivers connected in parallel in DALI dimming mode: 64 pcs. ⑤ Dimming depth of DALI dimming: 1%. Linear...

• PUSH dimming function Wiring diagram of PUSH dimming Switch from DALI mode to PUSH mode: short press PUSH switch to enable PUSH dimming function ① Connect PUSH switch between AC-L and DA1 PUSH in series and connect DA2 PUSH to AC-N. ② Make sure that AC-L and AC-N are NOT directly connected to DA1 PUSH and DA2 PUSH terminals. ③ Make sure that PUSH switch is off before the AC is powered on; operate PUSH after the AC is powered on. ④ Make sure the PUSH switch is off before disconnecting the AC. ⑤ If you have any questions about the wiring and operation, please confirm with Lifud FAE. ⑥ Wrong wiring...

Approach 3: keep moving in the effective sensing area for 3+ mins (set the sensor’s hold time for 3+ mins to enable the corridor lighting mode. Remarks: 1. In the automatic detection mode, the driver can be switched from PUSH mode to corridor lighting mode by approach 2 and 3, its brightness will dim up to 50%; long press for 3 mins and then it dims down and then dims up, which means the driver has entered the corridor lighting mode. 2. After activating the corridor dimming mode, PUSH DIM is turned off. 3. In the case of AC input and any level of brightness in the corridor lighting mode, switching...

Emergency function instruction The default output current is 15% Io max in the case of DC emergency input. Emergency input voltage: 180-264Vdc Note: 1. Emergency function can be set by Lifud programmer and programming software(or FEIG NFC reader) 2. It can be set from 0 to 100%. 3. If the emergency mode is on,input current is DC and output current is preset current; if the mode is off, input current is DC and the working mode is the same as the AC input. 4. In the case of mains input, the brightness is random when using PUSH dimming. When the driver enters the emergency escape lighting system...

NFC function instructions ①NFC Note: 1. When using an NFC reader, the driver is not allowed to operate while powered on. The driver must be powered off and completely discharged before it can read and write normally. ②Programmer setting box Lifud Programmer Note: When using the programmer, the driver must be powered on with AC for normal reading and writing. Certificates & standards Approval marks – approval

Logistical Data Product Packaging unit Gross weight Test equipment & condition AC power source: CHROMA6530, digital power meter: CHROMA66202, oscilloscope: Tektronix DPO3014, DC electronic load: M9712B, LED board, constant temperature and humidity chamber, Test Equipment lightning surge generator: Everfine EMS61000-5B, rapid group pulse generator: Everfine EMS61000-4A, spectroanalyzer: KH3935, hi-pot tester: EEC SE7440, flicker tester (flicker-free coefficient test): Everfine LFA-3000, etc. If there are no special remarks, the above parameters are tested at the ambient temperature of 25℃, humidity...