Output current adjustable via DIP switch Flicker free Suitable for Class II light fixtures 5-year warranty (please refer to the warranty condition) Applications · Indoor office lighting · decorative lighting · commercial lighting · residential lighting Descriptions LF-ACA012-0350-42 is a 12W constant current 0-10V/PWM/Rx CCT changeable LED driver. Its rated input voltage ranges from 220 to 240Vac and output current is adjustable via DIP switch from 100mA to 350mA with every 50mA as a step. Besides, it has all-round protections, including over voltage protection and short circuit protection. 42: maximum output voltage: 42V 0350: maximum output current: 350mA ACA: indoor 3-in-1 tunable white LED driver Lifud Technology Co., Ltd. Production Base I (HQ): Building B, Kutto Industrial Park, NO.26 Xinhe Road, Bao'an District, Shenzhen, China. Production Base II: No.4, Block 2, Tengfei Road, Shigao Economic Development Zone, Tianfu New Area, Sichuan, China. Website: www.lifud.com Telephone: +86(0)755 8373 9299 Emai

n Electrical Characteristics Model Output Voltage Output Current Flicker Index Current Tolerance Temperature Drift Startup Time Input Voltage Input Frequency Input Current Inrush Current Loading Quantities of Circuit Breaker Leakage Current Standby Power Consumption Protection Characteristics Environment Descriptions Complies with IEEE Std 1789-2015 Open Circuit Short Circuit Hiccup mode (input) Operating Temperature Operating Humidity 20-90%RH (no condensation) Storage Temperature/ Humidity Atmospheric Pressure -30℃~+80℃ (6 months in Class I environment); 10-90%RH (no condensation) 86-106kPa...

n Electrical Characteristics Certifications Withstanding Voltage Insulation Resistance Safety Standards IP Rating Other Parameters RoHS Warranty Condition Noise Level IP20 RoHS 2.0 (EU) 2015/863 5 years (Tc ≤86℃) ≤25dB (this data is measured in a soundproof room and the noise collector should be 10CM away from LED driver) Test Equipment AC power source: CHROMA6530, digital power meter: CHROMA66202, oscilloscope: Tektronix DPO3014, DC electronic load: M9712B, LED board, constant temperature and humidity chamber, lightning surge generator: Everfine EMS61000-5B, rapid group pulse generator: Everfine...

n Product Characteristic Curves PF Curve 1 Lifetime Curve Tc Point Testing Diagram Lifud Technology Co., Ltd. Production Base I (HQ): Building B, Kutto Industrial Park, NO.26 Xinhe Road, Bao'an District, Shenzhen, China. Production Base II: No.4, Block 2, Tengfei Road, Shigao Economic Development Zone, Tianfu New Area, Sichuan, China. Website: www.lifud.com Telephone: +86(0)755 8373 9299 Email: [email protected]

n Product Definitions Product Terminals INPUT Positive electrode of dimming Negative electrode of CCT/dimming Positive electrode output of LED driver Input terminal of AC live wire Negative electrode output of warm light Input terminal of AC neutral wire Negative electrode output of cold light Remark: except the known DIP switch methods, others are default to be the maximum. Lifud Technology Co., Ltd. Production Base I (HQ): Building B, Kutto Industrial Park, NO.26 Xinhe Road, Bao'an District, Shenzhen, China. Production Base II: No.4, Block 2, Tengfei Road, Shigao Economic Development Zone,...

n Dimming Operation Instructions 0-10V Dimming Operation Wiring Diagram of 0-10V Dimming Connect 0-10V signal to DIM terminal. In 0-10V dimming mode, when the input voltage is 0.5V±0.1, the light turns on; when it’s 0.3V±0.1, the light turns off. Dimming depth: 0.1% (Vo max & Io max) (typical value) DIM+/CCT+ (without signal connected): 100% cold light output CCT+: swi tch col d or warm l i ght; DIM+: adj ust brightness Warm white: CCT+: 8.6V±0.1V (on); 8.8V±0.1V (off) Cold white: CCT+: 0.5V±0.1V (on); 0.3V±0.1V (off) Neutral white: CCT+: 3.8V±0.1V Dimming Curve of Dim-to-off Version Input: 230Vac;...

n Dimming Operation Instructions PWM Dimming Operation Wiring Diagram of PWM Dimming Connect PWM signal to DIM terminal. Compatible signal: 1000(Hz); amplitude: 9-10(V) When it’s 6%±1%, the light turns on; when it’s 4%±1%, the light turns off. Dimming depth: 0.1% (Vo max & Io max) (typical value) DIM+/CCT+ (without signal connected): 100% cold light output CCT+: switch cold or warm light; DIM+: adjust brightness Warm white: CCT+: 86%±1% (on); 88%±1% (off) Cold white: CCT+: 5%±1% (on); 3%±1% (off) Neutral white: CCT+: 38%±1% Dimming Curve of Dim-to-off Version Input: 230Vac; output: 34Vdc/350mA...

n Dimming Operation Instructions Rx Dimming Operation Wiring Diagram of Rx Dimming Connect Rx signal to DIM terminal. When the resistance is 5K±1K, the light turns on; when it’s 3K±1K, the light turns off. Dimming depth: 0.1% (Vo max & Io max) (typical value) DIM+/CCT+ (without signal connected): 100% cold light output CCT+: switch cold or warm light; DIM+: adjust brightness Warm white: CCT+: 86KΩ±1KΩ (on); 88KΩ±1KΩ (off) Cold white: CCT+: 5KΩ±1KΩ (on); 3KΩ±1KΩ (off) Neutral white: CCT+: 38KΩ±1KΩ Dimming Curve of Dim-to-off Version Input: 230Vac; output: 34Vdc/350mA (this data is measured by...

n Structure & Dimensions (unit: mm; tolerance: ±0.5mm) Overall Apperance Overall Appearance (L*W*H) Distance Between 2 Positioning Holes Diameter of Positioning Hole n Packaging Specifications Model Carton Size 14 pcs/layer; 7 layers/ctn; 98 pcs/ctn Lifud Technology Co., Ltd. Production Base I (HQ): Building B, Kutto Industrial Park, NO.26 Xinhe Road, Bao'an District, Shenzhen, China. Production Base II: No.4, Block 2, Tengfei Road, Shigao Economic Development Zone, Tianfu New Area, Sichuan, China. Website: www.lifud.com Telephone: +86(0)755 8373 9299 Email: [email protected]

n Transportation and Storage 1. Transportation • Suitable transportation means: vehicles, boats and aeroplanes. In transit, it is necessary to prepare awnings for rain or sun protection. Moreover, please keep civilized loading and unloading to prevent the vibration or impact of LED driver as much as possible. The storage of LED driver shall conform to the standard of Class I environment. When using LED drivers which have been stored for more than 6 months, please re-test them firstly. Do not use them unless they are tested to be qualified. Please use Lifud LED driver according to its parameters...