LF-AAD008-0350-42
8Pages

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Product Description LF-AAD008-0350-42 is an 8W constant current DALI or PUSH dimmable LED driver. Its input voltage ranges from 198 to 264Vac and output current can be adjusted via DIP switch from 100mA to 350mA, in steps of 50mA. Features - IP20 - Suitable for Class II light fixtures - Constant current output and output current adjustable via DIP switch - DALI or PUSH dimmable; logarithmic or linear dimming curve selectable on DALI interface - Built-in active PFC function - Standby power consumption <0.5W - 0.1% dimming depth - 5-year warranty (please refer to the warranty condition) Applications - Horticultural lighting - Indoor office lighting - Decorative lighting - Commercial lighting - Residential lighting Product Naming LF- AAD008- 0350- 42 42: maximum output voltage: 42V 0350: maximum output current: 350mA 008: rated power: 8W AAD: DALI LED driver

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Electrical Characteristics Model Output Voltage (DC) Output Current Flicker Index Ripple Current Temperature Drift Start-up Time Input Voltage Input Frequency Load Quantity ≤15%@230Vac (narrowband; full load) ≥74% ≤4.2A&12uS@230Vac (Max) Circuit Breaker Model Circuit Breaker Surge Protection Leakage Current Standby Power Consumption ≤0.5W (when DALI OFF signal is effective) Open Circuit Short Circuit Hiccup mode (auto-recovery) Working Temperature -20℃ - +45℃ Environment Descriptions Working Humidity Storage...

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Certifications Safety Standards RoHS Warranty Condition DALI Standard 1. It is recommended that customer should install over voltage, under voltage and surge protection devices in the power supply circuits of the light fixtures to ensure safety before connecting to electricity. 2. When adjusting the output current via the DIP switch, please disconnect input AC power supply first so as to use the DIP switch without the input AC power supply connected. Remarks 3. The PC cover, casing, end caps and other parts of the LED...

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Product Characteristic Curves  PF Curves

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Dimming Operation Instructions  Product Terminals INPUT Input terminal of DA1 dimming Positive electrode output of the driver Input terminal of DA2 dimming Negative electrode output of the driver Input terminal of AC live wire Input terminal of AC neutral wire Remark: except the settings mentioned in the table above, other DIP switch settings are default to be the maximum current 350mA.  Wiring Diagram of PUSH Dimming Remark: when using PUSH dimming function, please make sure to power on AC-L/AC-N before powering on the...

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver - The PUSH operation won’t cause any variations if it’s less than 0.1S. - Connect the PUSH switch in series between AC-L terminal and DA1 terminal; short circuit AC-N and DA2 terminals. - Minimum dimming depth of PUSH dimming: 1% (Iout) - The PUSH dimming mode has the memory function in case of any power failure. Power on the driver again and the light will return to the state before the power failure. - Maximum wire length between the PUSH switch and the farthest LED driver: 135m; wire diameter: 16-22AWG - Maximum quantity...

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Structure & Dimensions (unit: mm) Packaging Specifications Packaging Dimensions 14 pcs/layer; 9 layers/ctn; 126 pcs/ctn

LF-AAD008-0350-42 DALI-2 0.1% Dimming Depth Flicker-free LED Driver Transportation & Storage  Transportation  Suitable transportation means: vehicles, boats and aircraft.  During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact.  Storage  Storage in accordance with the provisions of the Class I environment. For products which have been stored for more than six months, they mustn’t be used until they pass the re-inspection. Attention  Please use this product...