Universal Risers

Product catalog summary

Overview
The 5’ (1.5m) Universal Risers are designed for use with Hydraulic Gantry Systems to provide an additional lifting height of 5 feet without the need for extra track cribbing or stacking of lifting beams. This feature reduces the time and labor required for setup.

Features
- Provides an additional 5’ (1.5m) of system height.
- Integral Drives are built into the risers and connect to the gantry leg’s auxiliary hydraulic circuit, requiring no additional components.
- Compatible with models 44A, 48A, 34PT300LS/WS, and 34PT5400LS/WS, supporting full load capacities.
- Custom capacities and designs are available upon request.

Contact Information
- Office Address: 1505 - 7th Street, East Moline, IL 61244
- Mailing Address: P.O. Box 906, Moline, IL 61266
- Phone: +1-309-764-9842
- Fax: +1-309-764-9848
- Email: [email protected]
- Website: www.lift-systems.com

Dimensions
The document mentions the dimensions for the Model 48A base on the Universal Riser, but specific measurements are not provided.

Catalog excerpts

5’ (1.5m) UNIVERSAL RISERS For Hydraulic Gantry Systems FEATURES The 5’ Universal Riser is the simplest and fastest way to achieve additional lifting height. Without additional track cribbing, stacking of lifting beams, or a combination thereof, you can achieve 5’ (1.5 m) of additional system height with less time and labor. Integral Drives built into the risers plug into the gantry leg’s auxiliary hydraulic circuit as a nothing else needed option. Designed to accommodate models 44A, 48A, 34PT300LS/WS, and 34PT5400LS/WS with full load capacities. Custom capacities and designs are available—contact Lift Systems or your representative for details! UNIVERSAL RISERS SHOWN UNDER A MODEL 44A

Open the catalog to page 1