Global Leaders in Specialized Lifting Equipment!

TF45/60 GENERAL SPECIFICATIONS STANDARD EQUIPMENT ENGINE: GM 3.0L, 4 cylinder, 75 hp (56 Kw) propane engine 8’ self leveling forks. Tilt angle controlled from operating station. PUMP: Sundstrand 40 series drive pump CONTROL SYSTEM: 32,000 lbs base unit Standard “A” counterweight included CARL (Computer Assisted Remote Lifting) Control System. Monitors Boom Angle, Boom Extension, Pressure, Counterweight Load Pin. Automatic Shutdown for overload conditions. Large easy to read display screen with push button navigation and dial adjustment. COUNTERWEIGHTS: “A” - non-removable counterweight installed...

DIMENSIONAL DATA

LOAD CHARTS FOR FORKLIFT WITH COUNTERWEIGHT EXTENDED * THESE CAPACITIES ARE BASED UPON STRUCTURAL COMPETENCE COUNTERWEIGHT EXTENDED LOADS ARE BASED UPON 85% OF TIPPING LOAD CENTER BOOM EXTENSION LOAD CHARTS FOR FORKLIFT WITH COUNTERWEIGHT RETRACTED COUNTERWEIGHT RETRACTED LOADS ARE BASED UPON 85% OF TIPPING LOAD CENTER BOOM EXTENSION

WITH RIGGERS BOOM OPTION DIMENSIONAL DATA

WITH RIGGERS BOOM OPTION RANGE DIAGRAM / LOAD CHART WITH COUNTERWEIGHT EXTENDED A) ALL RATINGS ABOVE THE BOLD LINE ARE STABILITY LIMITS. STABILITY IS BASED ON B) ALL RATINGS BELOW THE BOLD LINE ARE BASED ON STRUCTURAL COMPETENCE AND NOT ON MACHINE STABILITY (TIPPING CONDITIONS). D) TELESCOPE CYLINDER MUST BE FULLY RETRACTED COUNTERWEIGHT WITH ANY LOAD E) BOOMS TO BE VERTICAL AT ALL TIMES DURING LIFTING.

WITH RIGGERS BOOM OPTION RANGE DIAGRAM / LOAD CHART WITH COUNTERWEIGHT RETRACTED A) ALL RATINGS ABOVE THE BOLD LINE ARE STABILITY LIMITS. STABILITY IS BASED ON B) ALL RATINGS BELOW THE BOLD LINE ARE BASED ON STRUCTURAL COMPETENCE AND NOT ON MACHINE STABILITY (TIPPING CONDITIONS). D) TELESCOPE CYLINDER MUST BE FULLY RETRACTED COUNTERWEIGHT WITH ANY LOAD E) BOOMS TO BE VERTICAL AT ALL TIMES DURING LIFTING.

TF45/60 WITH MOBILIFT BOOM OPTION DIMENSIONAL DATA

POWER BOOM POWER BOOM 1. The above chart is for reference purposes only. 2. Never use the above chart for lift planning calculations 3. Lift plan calculations are to be determined solely by the load charts and range diagrams that are issued for the specific serial numbered machine that is to be used for the specific planned lift.

WITH MOBILIFT BOOM OPTION LOAD CHART WITH COUNTERWEIGHT EXTENDED FOR USE WITH MOBILIFT BOOM AND HOOK BLOCK ONLY STANDARD COUNTERWEIGHT COUNTERWEIGHT FULLY EXTENDED POWER BOOM EXTENSION (FEET) A) CAPACITIES ABOVE BOLD LINE ARE BASED ON STRUCTURAL COMPETENCE AND NOT STABILITY. (TIPPING CONDITIONS) B) CAPACITIES BELOW BOLD LINE ARE BASED ON D) TELESCOPE CYLINDER MUST BE FULLY RETRACTED COUNTERWEIGHT WITH ANY LOAD SUSPENDED ON HOOK OR FORKS! LOAD CHART WITH COUNTERWEIGHT RETRACTED FOR USE WITH MOBILIFT BOOM AND HOOK BLOCK ONLY STANDARD COUNTERWEIGHT COUNTERWEIGHT FULLY RETRACTED POWER BOOM EXTENSION...