CARL for Power Towers
6Pages

{{requestButtons}}

Catalog excerpts

CARL for Power Towers - 1

CARL LOAD MANAGEMENT SYSTEM POWER TOWER HYDRAULIC GANTRY SYSTEMS WHAT IS CARL? CARL (Computer Assisted Remote Lifting) is an optional control platform for Lift Systems’ current Power Tower Hydraulic Gantry Line. Using state-of-art technology, the operator is informed of all important aspects of the gantry system and lifting operation, such as lift height, travel distance, and system pressures, at all times. Synchronization of lift, travel, and side shifting, allow for precise operation of the System with the greatest of ease. The CARL control module interacts with all functions of the machine and provides feedback to the operator in an easy-to-read and easy-tonavigate platform. The portability of the 7 lb. control module allows the operator the optimal view of the lift at all times. Radio Remote Control is also an option with the CARL System. All functions of the unit can be performed from a wireless belly pack with an emergency stop button standard. Unsafe situations are minimized with the CARL System. Visual and audio warnings, with automatic shutdown for out of tolerance conditions, ensures a safer lift. Operator acknowledgement of warning messages is required with the CARL System. Constant monitoring of the gantry system via an electric-over-hydraulic platform gives the operator feedback on the status of system components like never before. Most existing Lift Systems’ Power Tower Hydraulic Gantry Systems can be retrofitted with the CARL System. Contact your representative for details and pricing! CONTROL MODULE FOR POWER TOWER

Open the catalog to page 1
CARL for Power Towers - 2

CARL FOR POWER TOWERS— MAIN DISPLAY PAGE Lift Height Total Weight Lift Height Total Weight 4 Legs Freewheel All Synchro Off Lift Tare Mode 1 The first critical step in in performing a successful lifting operation with a hydraulic gantry system is proper setup with a strong foundation and level runway track. Proper operation is just as critical as the foundation. Information will assist your operator to perform the lift safely and efficiently. The main lifting page for the CARL Control System provides your operator with the most critical data required all on one screen. No other manufacturer...

Open the catalog to page 2
CARL for Power Towers - 3

CARL FOR POWER TOWERS— WEDGE STATUS PAGE The combination of the WedgeLock redundant drop prevention feature and the CARL Control System make Lift Systems' Power Towers an easy choice, because safety is everyone's paramount concern. Knowing the status of the safety features incorporated into a machine will give you piece of mind it is functioning properly. Each wedge of a Wedgelock equipped Power Tower has a sensor to let the operator know the wedge is disengaged when extending or retracting the system. If the sensor reads that the wedge is still engaged, the lift/lower function will be...

Open the catalog to page 3
CARL for Power Towers - 4

CARL FOR POWER TOWERS— UNIT SELECTION PAGE Depending on the scope of work you are performing, or the client you are performing the work for, different units of measurement may be a necessity. With the CARL Control System, it is possible to toggle between metric and English units of measure with the press of a button, and without affecting operation of the unit. Once the unit of measure is changed, all information is immediately updated throughout the system. INCHES FEET METERS CENTIMETERS POUNDS TONS KILOGRAMS METRIC TONNES

Open the catalog to page 4
CARL for Power Towers - 5

CARL FOR POWER TOWERS— MAXIMUM HEIGHT CONTROL When overhead obstructions become a factor, CARL is there to make life easier with the Maximum Height Control Feature. Input the height of your runway track, the height of your lifting beams, lifting links, side shift dollies, and the overall height that the gantry system should be allowed to extend to, and CARL will take it from there. Once the programmed maximum height is achieved, the CARL System will automatically cease extending the gantry system. The unit may be lowered at this point and extended again, but it will never extend past the...

Open the catalog to page 5
CARL for Power Towers - 6

CARL FOR POWER TOWERS— PREFENCES PAGE Options are what CARL is all about! Our multi-language option allows for your gantry system to operate in up to three languages, one of which must be English. The multilanguage setup of your unit can be done prior to completion at the factory. Simple, easy to complete, Microsoft Excel spreadsheets will be emailed to you for translation and upon return, downloaded into the CARL Program. This feature will allow you to use native terminology to your language, region, and even within your own organization to make your CARL equipped hydraulic gantry truly...

Open the catalog to page 6

All LIFT SYSTEMS catalogs and technical brochures

  1. Track Stands

    2 Pages

  2. Lift Links

    2 Pages

  3. Mobile Line

    74 Pages