Short description Axial piston motor FMV --- The Liebherr axial piston motors in the FMV series are designed as swashplates for open and closed circuits. The variable-displacement plug-in motors are available in nominal sizes ranging from 4.58 to 15.26 inch3 (75 to 250 cm³). The nominal pressure is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure is 5,511 or 6,527 psi (380 or 450 bar), depending on the nominal size. Special features of the FMV: The plug-in motor has hydraulic two-point control and valves can be integrated into the connecting plate. Speed sensor or preparation for speed sensor available on request. Valid for: FMV 075 involute gear hub profile FMV 100 involute gear hub profile FMV 140 involute gear hub profile FMV 165 involute gear hub profile FMV 250 involute gear hub profile Features: Axial piston motor (travel drive) A series Variable displacement Open and closed circuit Pressure range: Nominal pressure, NS 100 / 140 / 165 / 250 pN = 5,076 psi (350 bar) Nominal pressure, NS 075 pN = 6,092 psi (420 bar) Maximum pressure, NS 100 / 140 / 165 / 250 pmax = 5,511 psi (380 bar) Maximum pressure, NS 075 pmax = 6,527 psi (450 bar)

FMV variable displacement, open circuit, nominal pressure 5,076/6,092* psi (350/420* bar), maximum pressure 5,511/6,527* psi (380/450* bar) (*NS 75) Nominal size Displacement to hydraulic motor Vg m,x Displacement flow to hydraulic motor at n„ qv m„ Available controls Technical dataProduct dimensions [inch (mm)]* 75 Splined shaft profile DIN 5480 involute gear hub profile W35 x 2 x 16 Centering diameter A, h8 tolerance fit 6.69 (170) Connection dimension, screws B 7.95 (202) Splined shaft length D 1.57 (40) Connection length, SAE flange F 5.28 (134.2) * The dimensions can vary depending on the...

Travel drive/motor/variable displacement FMV

Large diameter bearings Human-machine interfaces and gateways Injection systems Axial piston hydraulics Gearboxes and rope winches Control electronics and sensors Electrical machines Power electronics From A to Z, the components division of the Liebherr Group offers a broad range of solutions for mechanical, hydraulic, electric and electronic drive and control technology. The efficient components and systems are produced at a total of ten production sites around the world to the highest standards of quality. Central contacts for all product lines are available to customers at Liebherr Component...