Short description Axial piston motor FMF --- The Liebherr axial piston motors in the FMF series are designed as swashplates for open and closed circuits. The constant-displacement plug-in motors are available in finely graded nominal sizes ranging from 1.53 to 15.26 inch3 (25 to 250 cm³). The nominal pressure is 5,076 or 6,092 psi (350 or 420 bar) and the maximum pressure is 5,511 or 6,527 psi (380 or 450 bar), depending on the nominal size. Special features of the FMF: Designed as a plug-in motor. The valves can be integrated into the connecting plate. Speed sensor or preparation for speed sensor available on request. Valid for: FMF 025 / FMF 032 / FMF 045 / FMF 058 / FMF 064 FMF 090 / FMF 100 / FMF 125 / FMF 165 / FMF 250 Features: Axial piston motor (travel drive) A series Constant displacement Open and closed circuit Pressure range: Nominal pressure, NS 025 / 032 / 090 / 100 / 125 / 165/250 pN = 5,076 psi (350 bar) Nominal pressure, NS 045 / 058 / 064 pN = 6,092 psi (420 bar) Maximum pressure, NS 025 / 032 / 090 / 100 / 125 / 165/250 pmax = 5,511 psi (380 bar) Maximum pressure, NS 045 / 058 / 064 pmax = 6,527 psi (450 bar)

FMF constant displacement, open and closed circuits, nominal pressure 5,076 76,092 psi (350V420 bar), maximum pressure 5,51176,527 psi (3807450 bar) (* NS 25-32, 90-250) Nominal size Displacement to hydraulic motor Vg m,x Displacement flow to hydraulic motor at nm,x, qv m,x Output power Ap = 4,786 psi (330 bar), Pm,x Technical dataProduct dimensions [inch (mm)] * Splined shaft profile Centering diameter Connection spacing, screws Fastening holes Splined shaft length Plug-in length Connection length, SAE, pressure Total length Pressure connections Leakage oil connection DIN 5480 involute gear...

Travel drive / motor / fixed FMF

Large diameter bearings Human-machine interfaces and gateways Injection systems Axial piston hydraulics Gearboxes and rope winches Control electronics and sensors Electrical machines Power electronics From A to Z, the components division of the Liebherr Group offers a broad range of solutions for mechanical, hydraulic, electric and electronic drive and control technology. The efficient components and systems are produced at a total of ten production sites around the world to the highest standards of quality. Central contacts for all product lines are available to customers at Liebherr Component...