Crawler Loader LR 626 ` litronic Operating Weight: 16,130 – 18,600 kg 35,561 – 41,006 lb Engine Output: 105 kW / 141 HP (SAE J1349) 105 kW / 143 HP (ISO 9249) Sta

Engine Liebherr Diesel engine D 924-A7-04 Emission regulations according to 97/68/EC, 2004/26/EC Stage IV, EPA/CARB Tier 4f Rated power (net) ISO 9249 105 kW / 143 HP Design 4 cylinder in-line engine, water-cooled, turbocharged, air-to-air intercooler Injection system Direct fuel injection, Common Rail, electronic control Lubrication Pressurised lube system, engine lubrication guaranteed for inclinations up to 45°, on all sides Operating voltage 24 V Air cleaner Dry-type air cleaner with pre-cleaner and automatic dust ejector, main and safety elements with radial seal Cooling...

Mounting Pivot shafts and equalizer bar (cushion mounted) Track chains Sealed and lubricated, track chain tension via grease tensioner and steel spring Links, each side 38 each side Track rollers, each side 6 Carrier rollers, each side 1 Track shoes, standard 508 mm / 20", double grouser Track shoes, optional 457 mm / 18", double grouser 560 mm / 22", double grouser Wider track shoes available on demand Grouser hight 35 mm / 1.38 in Operator sound exposure LpA = 78 dB(A) ISO 6396 (in the cab) Exterior sound pressure LWA = 109 dB(A) Refill Capacities Fuel tank Diesel...

1 Including coolant and lubricants, full fuel tank, ROPS / FOPS cab, operator, bucket, counterweight(s) and track shoes with 508 mm / 20". 2) Track shoes with 508 mm / 20". With other track shoes on demand at your dealer.

Multi-Purpose Bucket 1 Including coolant and lubricants, full fuel tank, ROPS / FOPS cab, operator, bucket, counterweight and track shoes with 508 mm / 20". 2> Track shoes with 508 mm / 20". With other track shoes on demand at your dealer.

Rear Attachments 3-Shank Ripper radial A Beam width mm ft in C Distance between shanks mm ft in E Ground clearance, max. below shanks mm ft in F Additional length, ripper raised mm ft in G Additional length, transport position mm ft in H Approach angle, ripper raised Ripper weight 1) kg lb Change in operating weight kg lb Change in ground pressure kg/cm2 psi Change in static tipping load kg lb 1) If the ripper is mounted, no counterweight will be fitted to the machine.

Equipment Base Machine Auto Idle Central lubrication system Dry type air filter dual step, with pre-filter and automatic dust ejector Engine compartment doors, lockable Fan, hinged Fan, hydraulically driven Fan, reversible Fuel pre-filter Fuel pre-filter, with electric heater Landfill arrangement LiDAT – Data transmission system Liebherr diesel engine emission stage IV / Tier 4f Liebherr hydraulic oil, biologically degradable Lugs for crane lifting, front Lugs for crane lifting, rear Radiator guard Heavy Duty, hinged Radiator, wide-meshed Special paint Tank guard Tool kit, basic Tool kit, extended...

Equipment Electrical System 2 additional working lights on the cab, rear 2 cold start batteries 2 working lights on the cab, rear 4 working lights on the cab, front All working lights in LED version Back-up alarm Back-up alarm, switchable Battery main switch Amber beacon Horn Immobiliser, electronic On-board voltage 24 V Undercarriage Idler-deflector Master link, two-piece Rear striker bar Sprocket segments with recesses Sprocket segments, bolted Sprocket-deflector Track frame, closed Track guard, full length Track guide, centre part Track guide, front and rear Track pads with mud holes Track...

State-of-the-art Technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical applications. Worldwide and Independent...