The Liebherr Working Tools
44Pages

The Liebherr Working Tools Everything from one source Anbauw_nurText_DE_FR_EN.indd 1 BP_Anbauwerkzeu_DE.indd 1 13.04.2010 16:43:11 Uhr 06.04.10 15:43

Liebherr working tools for excavators were designed as problem solvers for the most varied applications. The carefully balanced program ranges from standard buckets for digging and loading of loosened material to buckets for heavy-duty jobs in the mining industry with extreme break-out forces and high wear and tear. Equipped with effective, to the relating ground match- ing teeth the Liebherr digging tools provide a maximum productivity and longevity. Liebherr digging tools are particularly productive excavator components at the very latest technological level. Special bucket shapes, permit...

Bucket options Whether loose dirt, abrasive material or hard rock – quality and effectiveness of every excavator job are affected by the targeted selection of the suitable bucket. Therefore, Liebherr has designed a wide range of bucket options, which are especially suitable for an applicable job due to the shape, material selection and technical fittings. Practical experience and continued attention to product development assure that Liebherr buckets are always state-of-the-art technology. Backhoe bucket with teeth Backhoe bucket with cutting edge HD-backhoe bucket Backhoe bucket with...

Tiltable ditchcleaning-bucket Tiltable bucket Rigid ditchcleaning-bucket 5 Anbauw_nurText_DE_FR_EN.indd 5 BP_Anbauwerkzeu_DE.indd 5 13.04.2010 16:43:12 Uhr 06.04.10 15:44

Backhoe buckets Backhoe buckets are essential tools for Liebherr excavators. Due to their well thought-out geometry, the weight optimized genuine buckets are well matched to the Liebherr excavators. Good penetration characteristics and high productiv- Backhoe bucket with teeth • Typical utility jobs with medium to high break-out forces • Digging and loading of loosened material, e.g. dirt or clay • Weld-on tooth adapters • Generous cutting lip thickness • Bucket back reinforcement with wear resistant material • Buckets are optimally matched to excavator model • Good penetration...

Backhoe bucket with cutting edge Backhoe bucket with clip-on cutting edge 7 Anbauw_nurText_DE_FR_EN.indd 7 BP_Anbauwerkzeu_DE.indd 7 13.04.2010 16:43:12 Uhr 06.04.10 15:44

Various bucket shapes starting R 934 and for large machines With a longer bottom and strongly curved side cutters. Suitable for rocky ground conditions as well as loading of hard and coarse material (large boulders) and to place rip-rap for embankment construction. Cutting edge shapes Straight edge* With straight cutting lips for general loading jobs. Good floor maintenance capability. With the pointed V-shaped cutting lip and pull-up sin- gle tooth at the center for difficult to break, layered ma- terial. Optimal penetration characteristics for severe ripping jobs. V-delta edge* With the...

Bucket versions Wear resistance cutting edge and bottom with weld-on tooth adapter. Suitable for general utility, for digging and loading of matured and loosened but not abrasive materi- al such as top soil, clay etc. Additional back- (wear- and denting protection) and side reinforcements, weld-on tooth adapters for excavator jobs with a higher use. Suitable for digging and loa- ding of harder and abrasive materials such as topsoil, rock, sand/clay, sand/gravel and limestone with low to medium quality. Additional back- and side reinforcement, weld-on tooth adapter, reinforced cutting lip...

The right tooth for every appi The economic use of a hydraulic excavator is only possible if the tooth shape matches the relating application. Liebherr offers a broad tooth program with tooth shapes for every task. Due to its low overall heigth and the slim, self-sharpening tooth shape the Liebherr U-system stands for best diggning behavior at lowest penetration resi- stance. Highly wear-resistant steel provides familiar reliability under hard conditions, which has already stood the test on wheel loaders. The lateral rolled pin fastening allows a simple and safe change of teeth. Features:...

The optimized tooth design leads to efficiency increase of the Liebherr Z-system on the jobsite. The low digging resistance, the self-sharpening tooth shape or the simple hammer-free change of teeth speak for the Liebherr Z-system. The teeth are made out of high-strength steel which distinguishes itself through highest wear resistance and long service life. The conical shape allows for very good penetra- tion capacity in non-cohesive soils. Friable soils and weak non-cohesive soils, such as loose, loamy sand, fine to medium gravels, Long-drawn pointed shape with sharp cutting edge for very...

Buckets for special application Liebherr provides its customers with buckets in the very best material quality and outstanding workmanship. Far more than in pure earthmoving applications, they prove their worth day after day in mining operations demolition jobs, marine engineering and a string of oth- With performance, dependability and profitability, they set the standard as effective excavator tools in these extraordinary jobs. Backhoe bucket in marine engineering Backhoe bucket in demolition

The proven tilt buckets of the Liebherr excavators are the all-rounders for professional humus soil work and excavation. The rugged ditch cleaning buckets with patented tilt mechanism and protected, inside mounted, cylinders in various cutting widths are utilized as effective tools for 2.0 m3, cutting widths of 1,200-1,800 mm also available in HD version Tilt bucket • Slope finishing • Loading trucks • Thick wear plate on bucket bottom • 2 X 50° tiltable both sides • Tilt cylinder installed protected • Cutting edge available as an option (serrated upon request) • Particularly suitable for...

Upon request Liebherr offers the suitable working tool for almost every application. The tools are optimally matched to the excavator and consequently provide the highest digging perfor- mances. Adapting to the many types of problems, our designers have developed individual solutions in order to achieve optimal job results. • Digging of V-profile trenches • Ditch cleaning work • Steady trench profile in one operation • Defined floor width • Various slope angles available • Predetermined slope angle and floor width provides steady trench profile Ripper Tooth (no picture) • To loosen hard to...