The H cranes. Power and performance. Performance features at a glance. • • • • • • Printed in Germany by Wolf LBC -527-04.02-6gb 160° jib position for obstacle avoidance: all H cranes 20° raised jib position: all H cranes Folding tower of tight-welded solid-walled construction: all H cranes Advanced hydraulic erecting procedure: all H cranes Rocker-action lowering from axles: all H cranes Working radii 13 H: 20.0 m 20 H: 24.0 m 26 H: 28.0 m Ballast: self-centering ballast slabs (optional extra) semi-automatic ballasting device (optional extra) Slewing radii 13 H: 1.85 m 20 H: 2.00 m 26 H: 2.15 m Switchgear cabinet: standard contactor control system Hoist gear: all H cranes, 3-speed pole-changing motor 20 H, 26 H: with frequency converter (optional extra) EDC slewing gear: standard equipment on 20 H and 26 H cranes Overall lengths for road transport 13 H: 13.3 m 20 H: 14.4 m 26 H: 15.6 m Access ladder on tower: all H cranes (optional extra) Rotary power connector: standard feature on all H cranes Universal General Operating Permit (German ABE): all H cranes Quick-release axles: all H cranes Outrigger bearings can be lubricated: all H cranes Subject to technical modifications. Please contact LIEBHERR INDUSTRIAS METALICAS, S.A., Polígono Industrial Agustinos, Apartado 4096, E-31014 Pamplona, ట +34-948-29 70 00, Fax +34-948-29 70 29, www.liebherr.com, E-Mail: [email protected]

Crane performance and added value. On every construction site, Liebherr’s H cranes are a guarantee of economic high performance. These highly versatile cranes can be moved from one site to the next quickly and erected ready for use in a very short time. Handling capacity and reliability are impressive features of these fast-erecting cranes – giving you a clear lead in performance and value. The H series consists of the 13 H, 20 H and 26 H models. Hydraulics to simplify handling. Quicker to move, adaptable on site. Crane transport reveals the advantages of the H crane’s compact design. Depending...

Quicker to move, adaptable on site. The advantages of compact, well-planned design are evident in the ease with which H cranes can be moved from one site to the next. Using the high-speed axle, speeds of up to 80 km/h are permissible on motorways and similar high-speed roads. Depending on size, the crane can be moved on public roads as a 2-axle trailer with complete or partial ballast. The 13 H and 20 H travel with the full ballast in position; in the case of the 26 H, 4.5 t of the ballast remain on the crane and the remainder is carried on the towing vehicle. The rear axle can remain attached...

Hydraulics make handling simple. Easy hydraulic erecting system. Time-saving and economical: the hydraulic erecting linkage raises the H crane automatically by way of the rocker axle-removing device on to its support spindles, even on an uneven surface. As the crane unfolds, and of course during dismantling as well, the hoist and trolley travel ropes are kept at the proper tension automatically. Hydraulic rams on the tower and the jib move the H crane to its working position in no time at all. Erecting is so easy, fast and safe that it can be carried out by a single person without difficulty....

Well-planned to the last detail. Compact hydraulic unit. The H crane comes with a ready-to-use hydraulic system that is extremely compact and easy to operate. The valves and lines comply with the most stringent specifications. ‘Wear-Check’ lubricant analysis helps to extend the servicing intervals. The rotary power connector. H cranes have a rotary power connector as standard equipment, and can therefore slew unrestrictedly in either direction. Quick-release connections. The front and rear axles can be attached and removed rapidly and easily at these connections, which act as an additional safety...

The switchgear cabinet. The standard switchgear cabinet contains contactors for power control. As an optional extra, a frequency converter can be installed for continuously variable hoist speeds. EDC slewing gear. The 13 H has frequency-converter slewing gear with continuous speed control. The 20 H and 26 H have Liebherr’s patented EDC slewing gear as standard equipment. This permits sensitive and absolutely jolt-free starting and stopping of slewing movements. Other high-performance features: continuously adjustable working speeds, electronic wind-load control and oscillation damping for the...

The H cranes. Power and performance. Performance features at a glance. • • • • • • Printed in Germany by Wolf LBC -527-04.02-6gb 160° jib position for obstacle avoidance: all H cranes 20° raised jib position: all H cranes Folding tower of tight-welded solid-walled construction: all H cranes Advanced hydraulic erecting procedure: all H cranes Rocker-action lowering from axles: all H cranes Working radii 13 H: 20.0 m 20 H: 24.0 m 26 H: 28.0 m Ballast: self-centering ballast slabs (optional extra) semi-automatic ballasting device (optional extra) Slewing radii 13 H: 1.85 m 20 H: 2.00 m 26 H: 2.15...