1. Catalogs
  2. Liebherr Excavators
  3. Engine Control Unit – ECU2-HD

Engine Control Unit – ECU2-HD
1 /2Pages

Engine Control Unit – ECU2-HD

Engine Control Unit – ECU2-HD
1 /2Pages

Catalog excerpts

Engine Control Unit – ECU2-HD-1

Short Description Engine Control Unit – ECU2-HD Uncompromisingly robust: The ECU2-HD, rated IP6K9K, can be used under harsh conditions with connected or disconnected cable harness. The control is suitable for diesel engines and stationary gas engines with up to 12 cylinders. As a cascaded solution, it controls up to 20 cylinders. The ECU2-HD matches perfectly to the Liebherr Common Rail System. An interface for direct control of the SCR or of the SCRFilter system allows a combined regulation of engine and exhaust gas treatment with only one ECU2-HD. The control unit enables the fulfillment of various emission regulations, e.g. EU Stage IV  V, Euro V  VI and EPA Tier 4f. The con/  /  trol unit fulfills the functional safety requirements of function chains according to international safety standards. Due to the integrated self-diagnosis, the ECU2-HD checks itself, which facilitates maintenance. Integrated fuel cooling ensures safe and reliable operation of the ECU2-HD, even in case of strong heat generation. Features • Platform for EU Stage IV / V, Euro V / VI and EPA Tier 4f • Combined control of engine and exhaust gas treatment • 12 power outputs for injector activation • Control of up to 20 cylinders in cascaded use • Integrated knock control for stationary gas engines • Suitable for direct mount on the engine • High functionality of self-diagnostic for a safe operation • Standardized communication interfaces: J1939, UDS • Functional safety according to EN ISO 13849 • Temperature range from -40° C to +125 °C

 Open the catalog to page 1
Engine Control Unit – ECU2-HD-2

Technical Data Engine Control Unit – ECU2-HD Technical Data Microcontroller 256 MHz 4 MB Flash 256 kB RAM internal 4 MB RAM external (optional) 128 kB EEPROM external 10 x configurable logic levels Memory Digital inputs Analogue inputs Resistance inputs Frequency inputs 2 x Hall speed sensor 8 x universal frequency measurement range 0.5 Hz to 10 kHz Knock sensor inputs Constant voltage outputs 10 x half bridge configuration with current measurement Digital outputs Controlled analogue outputs Power outputs for injectors 12 x split into four stages Communication interfaces 4 x CAN according to...

 Open the catalog to page 2

All Liebherr Excavators catalogs and technical brochures

  1. T 284

    28  Pages

  2. Winch Systems

    8  Pages

  3. A 920

    28  Pages

  4. A 916

    44  Pages

  5. A 914

    38  Pages

  6. PR 726 Litronic

    22  Pages

  7. Timber Handling

    36  Pages

  8. PR 716 Litronic

    20  Pages

  9. LR 626 Litronic

    10  Pages

  10. LRS 645 LH

    4  Pages

  11. LRS 645

    8  Pages

  12. R 914COMPACT

    24  Pages

  13. A 918

    42  Pages

  14. LR 626

    10  Pages

  15. R 920

    28  Pages

  16. 914 Compact

    24  Pages

  17. Mining Truck

    24  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.