Technical data Hydraulic crawler crane

Dimensions Basic machine with undercarriage Operating weight The operating weight includes the basic machine with telescopic undercarriage, 2 main winches 100 kN each, including wire ropes (1x 90 m / 1x 70 m) and 10 m main boom, consisting of boom foot (6.0 m), boom head (3.5 m) and hinged section (0.5 m), 5.9 t basic counterweight, 600 mm 3-web grousers and 30 t hook block. 1. The lifting capacities stated are valid for lifting operation only (corresponding with crane classication according to F.E.M. 1.001, crane group A1). Total weight 2. Crane standing on rm, horizontal ground. 3. The weight...

Transport dimensions and weights Basic machine and boom (No. 0808.xx) Transport - with 10 m main boom includes the basic machine (ready for operation) with boom foot (6 m), boom head (3.5 m), hinged section (0.5 m), hook block (30 t) and counterweight (5.9 t). Weight complete with counterweight Transport - with 16 m main boom includes the basic machine (ready for operation) with boom foot (6 m), boom head (3.5 m), hinged section (0.5 m), 2x boom section (3 m), hook block (30 t) and counterweight (5.9 t). Weight complete with counterweight Transport - with 22 m main boom includes the basic machine...

Transport dimensions and weights Boom section Boom section Width Weight Hooks 30 t hook block – 1 sheave 700 Width Weight 10 t single hook Width Weight

Main winches Power rating according to ISO 9249, 180 kW (241 hp) at 2000 rpm Engine type Liebherr D 934 A7 SCR Fuel tank 470 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certication EPA/CARB Tier 4i or 97/68 EC Stage III B. ECO-Silent-Mode: For work not requiring high engine power, the diesel engine can be operated in the ECO-Silent-Mode (e.g. for inserting reinforcement cages or for lift crane operation). Due to the ECO-Silent-Mode which can be preselected by the operator the engine runs with optimum fuel efciency. This lowers consumption and...

(Main boom No. 0808.xx and 5.9 t counterweight) Slurry wall grab and clamshell Slurry wall grab Winch options Line speed 1st layer Max. chisel weight Winch options Line speed 1st layer

(Main boom No. 0808.xx and 5.9 t counterweight) Casing oscillator Casing oscillator Winch options Line speed 1st layer Max. drilling diameter

Load chart for duty cycle operation (Main boom No. 0808.xx) 5.9 t counterweight Capacities in metric tonnes for boom lengths (10 m - 22 m) - with 100 kN winches Boom length (m) Radius Above load chart is for reference only. For actual lift duty please refer to load chart in operator’s cab or manual. Maximum capacity in duty cycle operation with standard ropes Line pull Rope diameter Minimum breaking load Line pull - 1-rope duty cycle operation Line pull - 2-rope duty cycle operation 1) 1) Lifting a load exceeding the line pull of one winch is only allowed if it can be ensured that each individual...

Clamshell equipment Capacities in metric tonnes for boom lengths (10 m - 22 m) Working diagram Max. capacities in metric tonnes do not exceed 66.7% of tipping load. Capacities in duty cycle operation are for reference only and are not programmed in the LMI system. C = Radius / dumping radius J = Height of boom head sheave centre above ground level K = Length of clamshell (according to manufacturer‘s specication)

Main boom Main boom conguration (No. 0808.xx) Conguration for boom lengths (10 m - 22 m) Amount of boom extensions Length Boom foot Hinged section Boom section Boom head

Load chart for lift crane operation (Main boom No. 0808.xx) 5.9 t counterweight Capacities in metric tonnes for boom lengths (10 m - 22 m) - with 100 kN winches Boom length (m) Radius Above load chart is for reference only. For actual lift duty please refer to load chart in operator’s cab or manual.

HS 8030 HD—11223967—05/2014 Subject to change without notice. Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria Tel.: +43 50809 41–473, Fax: +43 50809 41–499 [email protected], www.liebherr.com facebook.com/LiebherrConstruction