Group: Liebherr
Catalog excerpts
Wheeled Excavator
Open the catalog to page 1Technical Data Hjf, Diesel Engine Hydraulic System Rating per ISO 9249 129 kW (175 HP) at 1,700 RPM Type Bore / Stroke Engine operation 4-stroke diesel Common-Rail turbo-charged and after-cooler reduced emissions Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Engine idling sensor controlled Electrical system Voltage 24 V Stage IV Harmful emissions values Emission control in accordance with 97/68/EG stage IV Liebherr-SCR technology Liebherr particle filter Fuel tank Urea tank J=r Cooling System Diesel engine water-cooled compact cooling system consisting...
Open the catalog to page 2Cab ROPS safety cab structure (roll-over protection system) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen Operator’s seat Standard air cushioned operator’s seat with 3D-adjustable armrests, headrest, lap belt, seat heater, manual weight adjustment, adjustable seat...
Open the catalog to page 3Dimensions are with attachment over steering axle * Attachment over digging axle for shorter transport dimensions 1) without backhoe bucket 2> Tipping cylinder retracted W = Max. ground clearance including approx. 150 mm piping
Open the catalog to page 5with Two-Piece Boom 5.40 m Digging Envelope with quick coupler Digging Forces without quick coupler Max, breakout force with ripper bucket 156.9 kN (16.0 t) Operating Weight The operating weight includes the basic machine with 8 tyres plus intermediate rings, two-piece boom 5.40 m, stick 2.45 m, quick coupler SW48 and bucket 1,050 mm / 0.80 m3. I Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers Stabilizer blade Stabilizer blade raised down + 2 pt. outriggers 4 point outriggers down ew Stabilizer blade + 2 pt. outriggers down Stick length (m) Stick...
Open the catalog to page 6with Two-Piece Boom 5.40 m in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The...
Open the catalog to page 7with Two-Piece Boom 5.40 m in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The...
Open the catalog to page 8with Two-Piece Boom 5.40 m EW-Undercarriage in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the...
Open the catalog to page 9with Two-Piece Boom 5.40 m EW-Undercarriage in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the...
Open the catalog to page 10Digging Envelope with quick coupler Digging Forces without quick coupler Max, breakout force with ripper bucket 156.9 kN (16.0 t) Operating Weight The operating weight includes the basic machine with 8 tyres plus intermediate rings, mono boom 5.20 m, stick 2.45 m, quick coupler SW48 and bucket 1,050 mm / 0.80 m3. I Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizers raised Stabilizer blade down Stabilizer blade 4 point outriggers + 2 pt. outriggers down Stabilizer blade Stabilizer blade down + 2 pt. outriggers Stick length (m) Stick length (m) Stick...
Open the catalog to page 11with Mono Boom 5.20 m in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated...
Open the catalog to page 12with Mono Boom 5.20 m in longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW48 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360o with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated...
Open the catalog to page 13All Liebherr Excavators catalogs and technical brochures
-
T 284
28 Pages
-
Common Rail Injector LI3
2 Pages
-
Common Rail Injector LI2
2 Pages
-
Common Rail Injector LI1
2 Pages
-
Mining Industry
8 Pages
-
Diesel Engines
4 Pages
-
Combustion Engines
32 Pages
-
Electric Travel Drive Systems
14 Pages
-
Winch Systems
8 Pages
-
Advanced Tunnel Technology
12 Pages
-
Troubleshoot Advisor
12 Pages
-
A 916
44 Pages
-
A 914
38 Pages
-
PR 736 - PR 756 Litronic
32 Pages
-
PR 726 Litronic
22 Pages
-
Timber Handling
36 Pages
-
Job Report PR 726 LGP
2 Pages
-
PR 716 Litronic
20 Pages
-
LR 626 Litronic
10 Pages
-
LRS 645 LH
4 Pages
-
LRS 645
8 Pages
-
LRS 545 Toplift
4 Pages
-
LRS 545 Intermodal
4 Pages
-
R 914COMPACT
24 Pages
-
A 918
42 Pages
-
LR 626
10 Pages
-
R 920
28 Pages
-
A 924 Heavy Lift
12 Pages
-
Product Brochure TA 230
16 Pages
-
Technical Description A 918
28 Pages
-
914 Compact
24 Pages
-
Product Brochure A 912 Compact
20 Pages
-
Product Brochure A 910 Compact
18 Pages
-
Liebherr RL-K Series
2 Pages
-
Liebherr Ship Cranes Overview
20 Pages
-
LR 614 – LR 634
12 Pages
-
crawler tractor PR 726 Litronic
10 Pages
-
Mining Truck
24 Pages
-
Duty cycle crawler cranes
12 Pages
-
The hydraulic excavators
12 Pages
-
The Liebherr Working Tools
44 Pages
-
Litronic-FMS II
4 Pages
-
Mobile crane LTM 1030-2.1
16 Pages