Catalogs >
Liebherr Cranes >
LTR 1060

LTR 1060
12Pages

Add to favorites

Catalog excerpts

Telescopic Crawler Crane LTR 1 060 Max. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m

Open the catalog to page 1

Telescopic Crawler Crane LTR 1060 Outstanding off road capabilities and manoeuvrability

Open the catalog to page 2

A long telescopic boom, high capacities, an outstanding manoeuvrability as well as an extensive comfort and safety configuration distinguish the telescopic crawler crane LTR 1060 from Liebherr. The 60-ton crane offers state of the art technology for more convenience for the practical operation. • Strong, 40 m long telescopic boom with high telescopable capacities • “Pick-and-carry”, driving with full capacity • Short erection times, fast repositioning on the job site • Transport weights: - Complete only 62.6 t - Without ballast only 37.5 t • Compact dimensions: - Transport width only 3.0 m...

Open the catalog to page 3

Transport example, crane with complete ballast Transport example, crane without ballast Central ballast 10 t Fast and economical ballasting of the central and slewing platform ballast

Open the catalog to page 4

Economical transportation and simple erection Optimized weights and dimensions The design lay out of the 60 ton crane allows a particular economic transportation. Complete with slewing platform and central ballast the LTR 1060 weighs only 62.6 t. The axle loads on transportation with a 3-axle tractor and a 5-axle trailer stay below 12 t. When using a 6-axle trailer and a 4-axle tractor the axle loads can even be reduced to 10 t. The crawlers are retracted to a width of 3.0 m during transportation. Due to the low crane height of 3.15 m cost effective standard low-bed trailers can be used. By...

Open the catalog to page 5

Hydrostatic drive from Liebherr • Drive by engine in superstructure • Stepless control of the driving speed • Normal gear 0 – 3 km/h Crawling gear 0 – 1 km/h • Drive force 410 kN • Ground pressure 8.6 t/m² • Gradeability 46 % 3-bar crawler shoes · Width 700 mm Option: Flat crawler sho

Open the catalog to page 6

Great operational diversity and comfort High ﬂexibility Based on its outstanding off road performance and the possibility to drive sensitively under full load the LTR 1060 offers a tremendous operational ﬂ exibility for e. g. erection of prefabricated sections, at pipeline construction or as auxiliary crane for the erection of wind power plants. Telescopable crawlers In cramped conditions the crawlers can be retracted hydraulically to a chassis width of 3.0 m. Also on this narrow crawler track the LTR 1060 can conduct crane operations, which are safeguarded by the LICCON safe load...

Open the catalog to page 7

The fully automatic telescoping system „TELEMATIK“ • Improvement of capacities at long booms and large radii due to “lightweight” telescoping system • 1-stage hydraulic cylinder with hydraulically operated drive pin • Maintenance free telescoping system • Telescoping fully automatic • Simple operation, supervision of telescoping at the LICCON monitor

Open the catalog to page 8

High capacities and ﬂexible boom system Powerful, long telescopic boom and functional lattice extensions The telescopic boom consists of the base section and 4 telescopic sections, which can be comfortably and automatically extended and pinned to the requested length by the thousand fold proven single cylinder telescoping system TELEMATIK. • 40 m long telescopic boom • 9.5 m – 16 m long double swing-away jib, attachable at 0°, 20° and 40° • Hydraulic assistance for assembly of the swing-away jib • 2.5 m long assembly jib • Rooster sheave, foldable sidewise High capacities with unpinned...

Open the catalog to page 9

The hoist gear • Liebherr hoist winch with internal planetary gear and spring loaded multi disk brake • Rope pull 45 kN at the outer layer • Max. rope speed 111 m/min • 2. hoist gear optional

Open the catalog to page 10

Powerful crane drive With proven components The drive components for the crane operation are designed for high performance and provide for sensitive and precise handling of the load. They are specially tuned for the crane operation and proved in severe long-term tests. • Crane engine: 4-cylinder Liebherr turbo diesel engine, 129 kW/175 HP at 1900 rpm, max. torque 815 Nm at 1500 rpm, optimized fuel consumption by electronic engine management • Diesel-hydraulic crane drive, open hydraulic circuits with electric „LOAD SENSING“-control, 4 working motions simultaneously possible •...

Open the catalog to page 11

Intelligent crane control For functional, safe and comfortable crane operation, the new control generation LICCON2 The soft- and hardware of the mobile crane control is developed by Liebherr in-house. The central point is the LICCON computer system (Liebherr Computed Controlling). The system undertakes extensive information, control and supervision tasks. With the mobile control and display unit BTT – Bluetooth Terminal the erection operations are comfortably and safely conducted within view. Driving of the crawler chassis and complete crane control with wireless remote control (Option) The...

Open the catalog to page 12

LTR 1060 12Pages

Catalog excerpts

All Liebherr Cranes catalogs and technical brochures

LTR 1060
12Pages