Group: Liebherr
Catalog excerpts
Truck Mounted Telescopic Crane LTF 1060-4.1 Max. capacity: 60 t Max. lifting height: 56 m Max. radius: 48 m
Open the catalog to page 1Truck mounted telescopic crane LTF 1060-4.1 Economical and flexible With a long telescopic boom and high capacities the compact truck mounted telescopic crane LTF 1060-4.1 from Liebherr on a standard truck chassis is an economical and flexible alternative in the taxi crane class. It drives on public roads with complete equipment and thus is immediately ready for operation on the job site.
Open the catalog to page 2• 40 m long telescopic boom • High capacities with full and part ballast • Low axle loads, flexible registration possibilities • Flexible crane control LICCON2 with mobile and multifunctional control and display unit BTT • Optional available wireless remote control, with which all crane movements outside of the cab can be operated • Low operating costs in driving mode due to use of standard trucks • Fuel saving by separate crane engine specifically adapted for crane operations
Open the catalog to page 3Extensive storage boxes for equipment and support timber are provided at the intermediate frame and the two front folding beams
Open the catalog to page 4Mobility and functionality Economical truck chassis The operational costs of the LTF 1060-4.1 are low due to the use of a standard truck chassis. Cost advantages result from the design related reduced fuel consumption and economical tyres and spare parts, because they are produced in large quantities. Optional available are additionally roomy, comfortable truck driver cabs with sleeping cabin. They offer flexibility on jobs and possibilities for relaxing for the driver. Special self produced Liebherr intermediate frame The connection to the crane chassis was designed by Liebherr using...
Open the catalog to page 5The crane cab • Large field of vision • Safety glasing • Tinted screens • Crane driver seat with lumbar support, multiple adjustable • Heat and noise insulated interior lining • Corrosion resistant • Working flood lights • 20° tiltable to the rear
Open the catalog to page 6Comfort and variability Fast, secure and variable erection The support, the ballast mounting as well as the installation of additional equipment is designed for speed, safety and comfort. For the safety of the operational staff steps and handholds are provided. Supporting the crane – fast, comfortable and safe • BTT Bluetooth Terminal, mobile control and display unit • Fully automatic levelling by pressing a push button • Engine start/stop and speed regulation The supports • 4 point support • Horizontally and vertically fully hydraulically extendable • Stroke of the support cylinders 720 mm...
Open the catalog to page 7Chassis Scania LTF 1060-4.1 - 38 Tonnen SCANIA TYP NTG B8x4 HZ 4750 mm / further truck chassis on request.
Open the catalog to page 8Flexible drive conditions Alleviated registration possibilities For mobility and flexibility serve the compact dimensions and low axle loads of the truck mounted telescopic cranes. The LTF 1060-4.1 meets for instance the conditions for an unlimited driving permission in Germany. Low axle loads As a taxi crane with 5 t ballast the LTF 1060-4.1 has a total weight of 38 t. Thereby the two front axles are loaded with ≤ 9 t and the rear axles with ≤ 10 t each. By reducing the carried ballast the total weight can be limited to 32 t. Ballast mounting – only a matter of minutes • Multiple number of...
Open the catalog to page 9The fully automatic telescoping system „TELEMATIK“ • Increase of capacities at long booms and wide radii due to “light” telescoping system • 1-stage hydraulic cylinder with hydraulically operated catch pin • Maintenace free telescoping system • Telescoping fully automatically • Most simple operation, monitoring of the telescoping action at the LICCON screen
Open the catalog to page 10High capacities and flexible boom system Powerful, strong telescopic boom and functional lattice extension The telescopic boom consists of the heel section and 4 telescopic sections, which are comfortably and automatically extended and pinned to the requested lengths by the thousand-fold proven single cylinder telescoping system TELEMATIK. • 40 m long telescopic boom • 9.5 m – 16 m long double swing-away jib, under 0°, 20° or 40° mountable • The swing-away jib is identical to the jib of the LTM 1055-3.2; LTM 1060-3.1 by this modular design the swing-away jib can be used on both crane types...
Open the catalog to page 11The hoist gear • Liebherr hoist winch with integrated planetary gear and spring loaded multiple disk brake • Rope pull 45 kN on the outer layer • Max. rope speed 111 m/min • 2. hoist gear optional
Open the catalog to page 12Powerful crane drive With proven components The drive components for the crane drive are designed for high efficiency and provide for a sensible and precise handling of the loads. They are specially adapted for the crane operation and proven in severe long-time tests. • Crane engine: 4-cylinder Liebherr turbo charged diesel engine, 129 kW/175 HP, max. torque of 1231 Nm, optimized fuel consumption by electronic engine management • Diesel-hydraulic crane drive, open oil circuits with electric “Load Sensing“control, 4 working motions simultaneously possible • Electric/electronic SPS-crane...
Open the catalog to page 13The LICCON test system • Fast detection of faults at the screen without metering instruments • Display of error codes and error description • Comfortable dialogue functions for monitoring of all in and out ports • Display of the functions and allocation of the sensors and the actors
Open the catalog to page 14Intelligent crane control For functional and safe crane operation, the LICCON computer system The soft- and hardware of the mobile crane control is developed by Liebherr in-house. The centre is the LICCON computer system (Liebherr Computed Control). • Integrated LML load moment limiter • Key components are in-house manufactured by Liebherr • Guaranteed spare parts availability • World wide proven under the most different climate conditions • Operator friendly The second control generation LICCON2 is the result of a continuous development by the Liebherr specialists and enables the adaption...
Open the catalog to page 15All Liebherr Cranes catalogs and technical brochures
-
Compact power – a fresh take
20 Pages
-
The K series
32 Pages
-
The L1 series. Compact power.
24 Pages
-
MK 140 mobile construction crane
24 Pages
-
LR 11350-P1800 Crawler Crane
52 Pages
-
Liebherr Port Cranes FCC and TCC
20 Pages
-
The 34 K fast-erecting crane
2 Pages
-
LTR 1060
12 Pages
-
LR 13000
12 Pages
-
LTF 1045-4.1
16 Pages
-
LG 1750
40 Pages
-
LTM 1030-2.1
20 Pages
-
LRT 1100-2.1
32 Pages
-
LRT 1090-2.1
32 Pages
-
LR 1750/2
64 Pages
-
LTC 1050-3 .1
56 Pages
-
357 HC-L
4 Pages
-
LTR 1220
72 Pages
-
380 EC-B 16 Litronic
4 Pages
-
The new 202 EC-B 10 Litronic
2 Pages
-
Flat-Top Crane 85 EC-B 5
4 Pages
-
The 53 K fast-erecting crane
24 Pages
-
The 34 K fast-erecting crane
2 Pages
-
Liebherr Ship Cranes Overview
20 Pages
-
Tower Cranes
42 Pages
-
MK 100/MK 110
19 Pages
-
MK 88
36 Pages
-
Mobile and Crawler Cranes
6 Pages
-
The Derrick Complete Service
4 Pages
-
HC-L cranes
7 Pages
-
HC Heavy Load Cranes
2 Pages
-
The EC-B Flat-Top cranes
13 Pages
-
LBS types
1 Pages
-
MTC 78000
4 Pages
-
Liebherr Offshore Cranes
16 Pages
-
Crawler and lattice boom cranes
24 Pages
-
Construction cranes.
21 Pages