LTF 1045-4.1
16Pages

Truck Mounted Telescopic Crane LTF 1045-4.1 Max. capacity: 45 t Max. lifting height: 44 m Max. radius: 42 m

Truck mounted telescopic crane LTF 1045-4.1 Economical and flexible With a long telescopic boom and high capacities the compact truck mounted telescopic crane LTF 1045-4.1 from Liebherr on a standard truck chassis is an economical and flexible alternative in the taxi crane class. It drives on public roads with complete equipment and thus is immediately ready for operation on the job site.

• 35 m long telescopic boom • High capacities with full and part ballast • Low axle loads, flexible registration possibilities • Flexible crane control LICCON2 with mobile and multifunctional control and display unit BTT • Optional available wireless remote control, with which all crane movements outside of the cab can be operated • Low operating costs in driving mode due to use of standard trucks • Fuel saving by separate crane engine specifically adapted for crane operations

Extensive storage boxes for equipment and support timber are provided at the intermediate frame and the two front folding beams.

Mobility and functionality Economical truck chassis The operational costs of the LTF 1045-4.1 are low due to the use of a standard truck chassis. Cost advantages result from the design related reduced fuel consumption and economical tyres and spare parts, because they are produced in large quantities. Optional available are additionally roomy, comfortable truck driver cabs with sleeping cabin. They offer flexibility on jobs and possibilities for relaxing for the driver. Special self produced Liebherr intermediate frame The connection to the crane chassis was designed by Liebherr using...

The crane cab • Large field of vision • Safety glasing • Tinted screens • Crane driver seat with lumbar support, multiple adjustable • Heat and noise insulated interior lining • Corrosion resistant • Working flood lights

Comfort and variability Fast, secure and variable erection The support, the ballast mounting as well as the installation of additional equipment is designed for speed, safety and comfort. For the safety of the operational staff steps and handholds are provided. Supporting the crane – fast, comfortable and safe • BTT – Bluetooth Terminal, mobile control and display unit • Fully automatic leveling by pressing a push button • Electronic inclination display • Engine start/stop and speed regulation The supports • 4 point support • Horizontally and vertically fully hydraulically extendable •...

Chassis Scania Ballast: 9 t + Double swing-away SCANIA TYP NTG B8x4 HZ 4750 mm / further truck chassis on requ

Flexible drive conditions Alleviated registration possibilities For mobility and flexibility serve the compact dimensions and low axle loads of the truck mounted telescopic cranes. The LTF 1045-4.1 meets for instance the conditions for an unlimited driving permission in Germany. Low axle loads As a taxi crane with a total ballast of 9 t and the swing-away jib the LTF 1045-4.1 has a total weight of 38 t. Thereby the two front axles are loaded with 9 t and the rear axles with 10 t each. By reducing the carried ballast the total weight can be limited to 32 t. If an even lower total weight is...

Proven hydro-mechanical telescoping system • Reliable single stage double acting hydraulic cylinder • Low boom centre of gravity due to 2-fold pulley tackle for the sections 2 and 3 • Telescope section 1 is extended/retracted by the hydraulic cylinder, the section 2 and 3 by the ropes • High telescopable capacities

High capacities and flexible boom system Powerful, strong telescopic boom and functional lattice extension The telescopic boom consists of the heel section and 3 telescopic sections, which are comfortably and automatically extended and pinned to the requested lengths by the thousand-fold proven single cylinder telescoping system TELEMATIK. • 35 m long telescopic boom • 9.5 m long single swing-away jib, under 0°, 20°, 40° or 60° mountable • The swing-away jib is identical to the jib of the LTM 1040-2.1; by this modular design the swing-away jib can be used on both crane types High capacities...

The hoist gear • Liebherr hoist winch with integrated planetary gear and spring loaded multiple disk brake • Rope pull 34 kN on the outer layer • Max. rope speed 120 m/min • 2. hoist gear optional

Powerful crane drive With proven components The drive components for the crane drive are designed for high efficiency and provide for a sensible and precise handling of the loads. They are specially adapted for the crane operation and proven in severe long-time tests. • Crane engine: 4-cylinder Liebherr turbo charged diesel engine, 129 kW/ 175 HP at 1800 rpm, max. torque of 815 Nm at 1500 rpm, optimized fuel consumption by electronic engine management • Diesel-hydraulic crane drive, open oil circuits wih electric „LOAD SENSING“control, 4 working motions simultaneously possible •...

The LICCON test system • Fast detection of faults at the screen without metering instruments • Display of error codes and error description • Comfortable dialogue functions for monitoring of all in and out ports • Display of the functions and allocation of the sensors and the actors

Intelligent crane control For functional and safe crane operation, the LICCON computer system The soft- and hardware of the mobile crane control is developed by Liebherr inhouse. The centre is the LICCON computer system (Liebherr Computed Control). • Integrated LMB load moment limiter • Key components are in-house manufactured by Liebherr • Guaranteed spare parts availability • Worldwide proven under the most different climate conditions • Operator friendly The second control generation LICCON2 is the result of a continuous development by the Liebherr specialists and enables the adaption to...