Mechanical seals catalogue - types
Mechanical seals catalogue - types
- Multispring Seals: These seals, including models like LMS10D and LMS15D, are unbalanced and attached to the shaft with Allen screws. They are suitable for toxic or dangerous products and are not dependent on rotation direction.
- Wave Spring Seals: Featuring a unique spring design, models such as LWS10 and LWS12 are available in balanced and unbalanced versions. They are recommended for sticky fluids and those with particles, offering a self-cleaning effect.
- Axial Spring Seals: Includes conical and cylindrical types, with models like FH and LS40A. These seals are versatile and suitable for clean fluid applications.
- Bellows Seals: Models like LMB84 and LRB17 are emphasized for their use in various industrial settings, particularly with sticky or high viscosity fluids.
- Operating Limits: Vary by model, with pressure limits ranging from 10 to 35 kg/cm² and temperature limits from -40 to +425°C, depending on the secondary seal materials.
- Components: Common components include rotating and stationary contact surfaces, O-rings, springs, and metal frames.
- Applications: Designed for use with barrier fluids, toxic products, and in high-pressure environments.
Catalog excerpts
Mechanical Seals
Open the catalog to page 1
Lidering Safe Industry Empreprise Secteurs Auxiliary Products LC LHP LQT LS LST Spring Seals Stationary Parts Special Designs RMS Seals Repair workshop,Quality control, checking and testing Certifications General Information Chemical Resistance Chart Compatibility Chart Related Products Consult our cartridges catalog Identification Guide Mechanical Seals Notes Axial Spring Seals: Conical FH / FHC FN / LS15 and FN.NU / LS15DIN LS18 / LS19 LS18B LS60IN / LS60IL RN / LS60 and RN.NU / LS60DIN RNB / LS60B and RN.NB / LS60BDIN Axial Spring Seals: Cylindrical LS40A LS40C
Open the catalog to page 3
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 1a Rotating contact surface 2 Stationary contact surface 2a Stationary contact surface 3 O-rings 3a O-rings 3b O-rings 3c O-rings 4 Springs 5 Metal frame 5a Set screws 5b Ring CHARACTERISTICS: • Unbalanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. OPERATING LIMITS: d,= 18 - 100 mm p= 16 kg/cm! v= 20 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing...
Open the catalog to page 4
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Springs 5 Metal frame 5a Set screws 5b Ring CHARACTERISTICS: • Unbalanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. OPERATING LIMITS: d,= 18 - 100 mm p= 10 kg/cm! v= 20 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: The contact...
Open the catalog to page 5
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Springs 5 Metal frame 5a Set screws 5b Ring CHARACTERISTICS: • Unbalanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. OPERATING LIMITS: d = 20 - 100 mm p= 12 kg/cm! v= 20 m/s t= -40- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: The contact...
Open the catalog to page 6
MULTISPRING SEALS LMS14 SECTORS: COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3a O-rings 3b O-rings 3c O-rings 4 Springs 5 Metal frame 5a Set screws 5b Coupling pin CHARACTERISTICS: • Balanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. OPERATING LIMITS: d,= 18 - 100 mm p= 14 kg/cm! v= 15 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application....
Open the catalog to page 7
MULTISPRING SEALS Rotating contact surface Rotating contact surface Stationary contact surface Stationary contact surface O-rings O-rings O-rings Springs Metal frame Set screws CHARACTERISTICS: • Unbalanced. • System attached to the shaft by allen screws. • Not dependent on the rotation direction. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: Double seal for working with barrier fluids in which the springs...
Open the catalog to page 8
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3T PTFE wedge 3a O-rings 3Ta PTFE gasket 4 Springs 5 Metal frame 5a Set screws 5b Ring CHARACTERISTICS: • Unbalanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. OPERATING LIMITS: d,= 14 - 100 mm p= 10 kg/cm! v= 20 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: The...
Open the catalog to page 9
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3T PTFE wedge 3a O-rings 3Ta PTFE gasket 4 Springs 5 Metal frame 5a Set screws 5b Ring CHARACTERISTICS: • Balanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: The balanced contact surface design allows the mechanical seal...
Open the catalog to page 10
MULTISPRING SEALS COMPONENTS: 1 Rotating contact surface 3a O-rings 4 Springs 5 Metal frame 5a Set screws CHARACTERISTICS: • Unbalanced. • System attached to the shaft by alien screws. • Not dependent on the rotation direction OPERATING LIMITS: d,= 20 - 100 mm p= 12 kg/cm! v= 20 m/s t= -40 - +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: The contact surface of the rotating part can be detached,...
Open the catalog to page 11
MULTISPRING SEALS LMS26 SECTORS: COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3a O-ring 4 Spring 5 Metal frame 6 Ring 7 Metal frame 8 Setting clips CHARACTERISTICS: • Equilibrado. • Sistema rotacion independiente • Multimuelle • External mounting. t= -20- +140°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: Balanced mechanical seal with protected springs to prevent them from blocking...
Open the catalog to page 12All LIDERING catalogs and technical brochures
Dry Seals Range_EN 02-20202 Pages
Paper Industry4 Pages
Industrial Refrigeration2 Pages
Products for Industry2 Pages
Dairy Industry2 Pages
Brewing Industry2 Pages
BRAIDED PACKING8 Pages
Sewage Treatment Plants2 Pages
PACKING GLOSTER-PACK8 Pages
MECHANICAL FACE SEALS2 Pages
AUXILIARY PRODUCTS3 Pages
RMS MECHANICAL SEAL7 Pages
SEAT SHAPE3 Pages
BELLOW18 Pages
AXIAL/CONICAL SPRING9 Pages
WAVE SPRING6 Pages
MULTI-SPRING12 Pages
CARTRIDGES84 Pages
LS40C1 Page
FH-FHC FN/LS151 Page
Lsc39-FQ1 Page
Flat gaskets12 Pages
RESERVOOIR LTS1 Page
LMS111 Page
LS1 Page
LST-LHP1 Page
LC-LQT1 Page
LDC401 Page
LDC211 Page
LDC22-F1 Page
LDC39-D1 Page
LDC381 Page
LDC801 Page
Kitting1 Page
LSC40-F1 Page
LSC211A1 Page
LSC2111 Page
LSC211 Page
LSC221 Page
LSC39-F1 Page
LSC39 FQ1 Page
LSC381 Page
LSC50-F1 Page
Lidering a new image16 Pages
- Solids separator
- Rotary joint
- Centrifugal classifier
- Multi-port rotary union
- Air rotary distributor
- Oil rotary distributor
- Particle separator
- Pump mechanical seal
- Metal mechanical seal
- Braided PTFE packing
- Spring mechanical seal
- Braided graphite packing
- Cartridge mechanical seal
- Stainless steel separator
- Cyclone classifier
- Vertical separator
- Mechanical seal for the chemical industry
- Face mechanical seal