Catalog excerpts
SINGLE CARTRIDGE SEALS CHARACTERISTICS: • Balanced. • Multispring. • Not dependent on the rotation direction. • Flush connections. OPERATING LIMITS: d1= 50 f 150 mm p= 10 kg/cm2 v= 10 m/s t= - 40 f + 150oC (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A split single cartridge seal with flushing connection. Adequate for use in applications in which the braided packing must be replaced and there is insufficient space in the application or dismantling the pump is very complicated or takes too long. Each half is installed around the shaft and put together using the screws, without having to dismantle the pump. DIMENSIONS CHART Dimensions in mm Dimensions subject to changes or modifications. SAFE INDUSTRY
Open the catalog to page 1All LIDERING catalogs and technical brochures
-
Dry Seals Range_EN 02-20202 Pages
-
Paper Industry4 Pages
-
Industrial Refrigeration2 Pages
-
Products for Industry2 Pages
-
Dairy Industry2 Pages
-
Brewing Industry2 Pages
-
BRAIDED PACKING8 Pages
-
Sewage Treatment Plants2 Pages
-
PACKING GLOSTER-PACK8 Pages
-
MECHANICAL FACE SEALS2 Pages
-
AUXILIARY PRODUCTS3 Pages
-
RMS MECHANICAL SEAL7 Pages
-
SEAT SHAPE3 Pages
-
BELLOW18 Pages
-
AXIAL/CONICAL SPRING9 Pages
-
WAVE SPRING6 Pages
-
MULTI-SPRING12 Pages
-
CARTRIDGES84 Pages
-
LS40C1 Pages
-
FH-FHC FN/LS151 Pages
-
Lsc39-FQ1 Pages
-
RESERVOOIR LTS1 Pages
-
LMS111 Pages
-
LS1 Pages
-
LST-LHP1 Pages
-
LC-LQT1 Pages
-
LDC401 Pages
-
LDC211 Pages
-
LDC22-F1 Pages
-
LDC39-D1 Pages
-
LDC381 Pages
-
LDC801 Pages
-
Kitting1 Pages
-
LSC40-F1 Pages
-
LSC211A1 Pages
-
LSC2111 Pages
-
LSC211 Pages
-
LSC221 Pages
-
LSC39-F1 Pages
-
LSC39 FQ1 Pages
-
LSC381 Pages
-
REPAIR OF MECHANICAL SEALS1 Pages
-
Flat gaskets12 Pages
-
Lidering a new image16 Pages
