SINGLE CARTRIDGE SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 4 Springs 5 Set screws 6 Sleeve 7 Flange 8 Setting clips 9 Flat gasket 10 Drive ring CHARACTERISTICS: • Balanced. • Multispring. • Not dependent on the rotation direction. • Flush connections. OPERATING LIMITS: d,= 25 - 100 mm p= 25 kg/cm! v= 16 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A single cartridge seal with connections for flushing the mechanical seal contact surfaces. The springs are protected from the product to prevent blocking in applications with particle. The standard flange has a flushing connection for cleaning and cooling the contact surfaces. The flange can be supplied without connections (LSC40) or with a quench connection (LSC40-Q). CONNECTIONS (R): From 25 mm to 35 mm: 1/4” NPT. From 38 mm to 100 mm: 3/8” NPT. Dimensions in inches Shaft DIMENSIONS CHART Dimensions in mm I Shaft Dimensions subject to changes or modifications. SAFE INDUSTRY