Catalogs >
LIDERING >
Lsc39-FQ

Lsc39-FQ
1Pages

Catalog excerpts

SINGLE CARTRIDGE SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 4 Springs 5 Set screws 6 Sleeve 7 Flange 8 Setting clips 9 Flat gasket 10 Drive ring CHARACTERISTICS: • Balanced. • Multispring. • Not dependent on the rotation direction. • Flushing and quenching connections. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A single cartridge seal that allows the injection of external fluids (quenching and flushing) and the recirculation of internal fluids (flushing). It is advisable to use quenching fluids if there is a possibility of freezing, solidification or sedimentation of the product and to keep the contact surfaces lubricated. CONNECTIONS: From 25 mm to 60 mm: 1/4” NPT. From 63 mm to 140 mm: 3/8” NPT. DIMENSIONS CHART Dimensions in mm Dimensions in inches Dimensions subject to changes or modifications. SAFE INDUSTRY

Open the catalog to page 1