SINGLE CARTRIDGE SEALS LSC22 SECTORS: COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 4 Springs 5 Sleeve 6 Set screws 7 Flange 8 Setting clips 9 Flat gasket 10 Drive ring CHARACTERISTICS: • Balanced. • Multispring. • Not dependent on the rotation direction. • Flush connections. OPERATING LIMITS: d,= 25 - 100 mm p= 25 kg/cm! v= 20 m/s t= -15- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A single cartridge seal with a multispring system in the rotating part that absorbs the transmission of misalignments, knocks, oscillations and vibrations of the shaft on the contact surfaces and extends the useful life in unfavourable operating conditions. In addition, the springs are protected from the product to prevent blocking in applications with particle-laden fluids. CONNECTIONS: From 25 mm to 60 mm: 1/4” NPT. From 63 mm to 110 mm: 3/8” NPT. Dimensions subject to changes or modifications. 07/16 & Hidering SAFE INDUSTRY