SINGLE CARTRIDGE SEALS COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 4 Springs 5 Set screws 6 Sleeve 7 Flange 8 Setting clips 9 Flat gasket 10 Drive ring CHARACTERISTICS: • Balanced. • Multispring. • Not dependent on the rotation direction. • Stuffing box gland shape. • Flush connections. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: This cartridge seal has an economic design with a stuffing box gland shape for replacing packing in pumps. The springs are protected from the product to prevent blocking in applications with particle-laden fluids. The cooling of the contact surfaces can be improved using the flush connection. CONNECTIONS: From 25 mm to 53 mm: 1/4” NPT. From 55 mm to 100 mm: 3/8” NPT. DIMENSIONS CHART Dimensions in mm Dimensions subject to changes or modifications. SAFE INDUSTRY