GASKETS FLAT We possess the means and the technology needed for cutting or machining flat sealing gaskets for a wide range of industrial machinery and flow control applications. Depending on the material, gasket shape, quantity and even proper tolerances for the application, flat gaskets are manufactured by cutting sheet metal or machining rod or pipe. Our products always consider the most suitable manufacturing method to best fulfil the various needs of the application. RANGE OF MATERIALS: PTFE. (Teflon®). PTFE is a tetrafluoroethylene thermoplastic polymer. It is characterised by a low coefficient...

Modified PTFE with hollow glass microspheres. High compressibility. Industry in general. Modified PTFE with barium sulphate. FDA-TA-Luft DVGW-BAM. High grade of purity, physiologically harmless. -210 °C to 1-1.5- Modified PTFE with silica. High mechanical resistance at, high pressure and temperatures. Suitable for the chemical and petrochemical industry. FDA-TA-Luft DVGW-BAM. FIBRE MATERIALS FOR FLANGE GASKETS We hold a wide stock of materials for flange gaskets, all of which are asbestos-free and manufactured from various fibre with elastic binder, with a high resistance to residual deformation...

Material composition Glass fibres with NBR binder. Temperature range Material for universal use in general applications in industrial equipment, pumps, valves, compressores, etc. Depending on the medium, from -100 °C to + 200 °C. DVGW, KTW, WRAS, BAM (60 °C/130 bar) TA Luft, BS 7531 Grade X. Material composition Graphite + Kevlar fibres + NBR. Material composition Temperature range Universally used material for sealing fluids. Excellent chemical and thermal resistance. It may be used as the only material in 80% of applications. Depending on the medium, from -100 °C to + 300 °C. DVGW, KTW, WRAS,...

Material composition Temperature range Aramid fibres reinforced with a steel wire insert. Suitable for extreme temperatures and high mechanical performance. High temperature gases. Suitable for applications in the exhaust systems of internal combustion engines, turbocharges and compressors. Temperature range FLANGE GASKETS- FLAT GASKETS Material with a high mica content, reinforced with stainless steel AISI 316L. Material composition

EXPANDED GRAPHITE MATERIAL WITH METAL INSERT The combined materials formed by 98% pure expanded graphite on a metal insert provide excellent performance in extreme operating conditions. They can work at temperatures from -240 ºC to +550 ºC, at pressured up to 250 bar. The design of the metallic mesh allows excellent graphite bonding. Material composition Temperature range Suitable for high temperatures and pressures. High resistence to organic and inorganic acids, oils and solvents. DVGW, KTW, BAM (200 ºC /130 bar), Fire safe, TRD 401. Material composition Temperature range Expanded graphite...

MATERIAL FOR THE INSULATION OF HEAT Material composed of ceramic and mineral fibre for use both for high temperature insulation and for gaskets for inert gases, up to pressures of 0.5 bar. The use of various materials is determined by the temperature limits for use and by values of thermal conductivity. Material composition Temperature limit Coefficient of heat conductivity Fibres materials. Material composition Temperature limit Coefficient of thermal conductivity Mineral fibres and ceramics. Material composition Temperature limit Coefficient of thermal conductivity Mineral fibres and ceramics....

VMQ-FDA Silicon rubber A= Excellent/very good, B= Good, C= Bad, X = May not be used.

Density kg/m³ Water absorption by % weight Weather resistence. Ozone resistence EPDMT160EP Ethylene propylene diene FLANGE GASKETS- FLAT GASKETS EPDMT100 EPB. Ethylene propylene diene STANDARD RANGE OF ELASTIC SPONGE MATERIAL FOR THE MANUFACTURE OF FLAT

TABLE OF GASKET DIMENSIONS TO ANSI B16.5 - R.F. ANSI B16,21 Outside dia. Ø Nominal Dn