AXIAL/CONICAL SPRING
9Pages

AXIAL SPRING SEALS: CONICAL FH / FHC COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 3b O-rings 3T PTFE wedge 3Ta PTFE gasket 4 Spring 5 Metal frame CHARACTERISTICS: • Unbalanced. • Single conical spring. • Dependent on the rotation direction. • Exchangeable contact surfaces. OPERATING LIMITS: d,= 10 - 100 mm p= 10 kg/cm! v= 20 m/s t= -20- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A general-purpose single, robust seal in which the contact surfaces can be exchanged with each other. It can be used in industrial applications for clean fluids with low viscosities or with a low content of suspended solids that tend to produced sediments or adhere to the seal. Types: FH6: secondary seals made of PTFE. FHC: same structure as FH but the length is I3C. DIMENSIONS CHART Dimensions in mm Dimensions subject to changes or modifications. SAFE INDUSTRY

AXIAL SPRING SEALS: CONICAL FN / LS15 and FN.NU / LS15DIN COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 3b O-rings 4 Spring 5 Metal frame A Spacer not provided with the seal CHARACTERISTICS: • Unbalanced. • Single conical spring. • Dependent on the rotation direction. OPERATING LIMITS: d,= 10 - 40 mm p= 10 kg/cm! v= 20 m/s t= -20- +180°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those...

AXIAL SPRING SEALS: CONICAL CHARACTERISTICS: • Unbalanced. • Single conical spring. • Dependent on the rotation direction. OPERATING LIMITS: d,= 10 - 80 mm p= 10 kg/cm! v= 20 m/s t= -20- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: Single mechanical seal with an extremely versatile and functional design. The rotating part of the seal can be combined with a large variety of...

AXIAL SPRING SEALS: CONICAL LS18B COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Spring 5 Metal frame CHARACTERISTICS: • Balanced. • Single conical spring. • Dependent on the rotation direction. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: This mechanical seal has an extremely versatile and functional design and is suitable for working at pressures of up to 25...

AXIAL SPRING SEALS: CONICAL CHARACTERISTICS: • Unbalanced. • Single conical spring. • Dependent on the rotation direction. OPERATING LIMITS: d1=20 - 100 mm p= 10 kg/cm! v= 20 m/s t= -40- +180°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A versatile, robust single seal that is widely used in many different industrial and household applications. DIMENSIONS CHART LS60IL Dimensions in mm Shaft...

AXIAL SPRING SEALS: CONICAL RN / LS60 and RN.NU / LS60DIN COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Spring 5 Metal frame A Spacer not provided with the seal CHARACTERISTICS: • Unbalanced. • Single conical spring. • Dependent on the rotation direction. OPERATING LIMITS: d,= 10 - 140 mm p= 10 kg/cm! v= 20 m/s t= -20- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the...

AXIAL SPRING SEALS: CONICAL RNB / LS60B and RN.NB / LS60BDIN COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Spring 5 Metal frame CHARACTERISTICS: • Balanced. • Single conical spring. • Dependent on the rotation direction. (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those of the application. DESCRIPTION: A versatile, robust single seal that is widely used in many different industrial and household...

AXIAL SPRING SEALS: CYLINDRICAL LS40A COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Spring 5 Metal frame 5a Set screws CHARACTERISTICS: • Unbalanced. • Single cylindrical spring. • Dependent on the rotation direction. • System attached to the shaft by allen screws. OPERATING LIMITS: d,= 20 - 100 mm p= 12 kg/cm! v= 15 m/s t= -20- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those...

AXIAL SPRING SEALS: CYLINDRICAL LS40C COMPONENTS: 1 Rotating contact surface 2 Stationary contact surface 3 O-rings 3a O-rings 4 Spring 5 Metal frame 5a Set screws CHARACTERISTICS: • Unbalanced. • Single cylindrical spring. • Dependent on the rotation direction. • System attached to the shaft by allen screws. OPERATING LIMITS: d = 20 - 100 mm p= 12 kg/cm! v= 15 m/s t= -20- +200°C (*) (*) The temperature resistance depends on the material of the secondary seals used. The operating limits are defined by the PV factor which is determined for the sealing system characteristics and those...