HDL, Heat DetectorLICO Safety switch to detect heat and prevent overheat and fire
29Pages

STAY COOL • HIGH TEMP STILL TEST Wir haben die richtige Losung um Hitze von Brand & Explosion zu vermeiden. We have the right solution for you to detect Heat from 60 - 510°C and avoid Overheat, Fire & Explosion LICO Electronics GmbH, A-2320 Kledering LICO Mecatronic, RO-540526 Targu-Mures

PAF - The Smart Heat- & Fire Detection System Detection and Alarm Devices Fire warning is a basic function and often early Detection of excessive high temperatures is most critical. Excessive heat, even without the presence of smoke, can be a potential hazard of fire or explosion. The prevention of a potential fire, caused by excessive heat, allows corrective action to avoid igniting flames. In conclusion - effective action can save lifes and protect high value buildings and assets. The system can be used for single or unused Heat Detec- tion using 2 equal switching temperatures. Ex e & Ex...

HDL 1-6 Heat Detector LICO – Ex e & Ex d encapsulated Heat-, Overheat- & Fire-Detector www.prevent-a-fire.eu HDL-3 HDL-2 HDL-528000 HDL-1 HDL-5 HDL-6 HDL-5 HDL-4 HDL-3-XL www.fenwal-direct.eu - HDL-4 www.prevent-a-fire.eu

HDL 2 - HDL3-Ex* www.prevent-a-fire.eu HDL-2 HDL-3-EX* Heat Detector LICO = HDL HDL-3 – Ex*, HDL-2 IP65/IP66 – CE – – 30 / + 80°C with Neoprene seal 30 / +130°C with Silicone seal, IP65 IP66/67 – CE Ex until 135°C – 70 / +220°C with special Silicone seal, IP66/IP67 • • Mounted in Ex-cert. Box with Ex.cert. Ex-cert cable gland, Ex-cert wiring block, also available as HDL3 without Ex Information for all HDL: (HDL = Heat Detector LICO) Heat detector for special applications Heat Detector for Fire Alarm Systems Automatic Reset after cooling Shock-Humidity-& Temperature resistant Switching...

Fenwal DAF mounted in Alu-Industrial Box Complete and ready to go with Box, Cable gland and wiring block assembly - Aluminum housing - 2 Ground terminals inside - 1 or 2 Cable glands. Metal housing - Dimensions Housing: - recessed Screws - oil-resistant mounting of Heat Detector - 2. Cable gland (Option KD) - Series und EOL - End of Line Resistors Fenwal DAF mounted in Alu-Industrial Box Complete and ready to go with Ex-certified Box, Cable gland and wiring block assembly. Resistors available according to Ex. - Aluminum housing - High Temperature-Silicone-seal Temp use up to 200°C + with...

HDL5- 60-210/220°C Heat Detector LICO - with Ex-certified Components The TRUE High-Temp-Heat Detector Free Choice of Fenwal Detect-A-Fire switches, Temperature range: 60 - 232°C Product description: Fenwal-Switch of free Choice 1 or 2 Special-Stainless steel Cable Glands Ceramic wiring Block with only stainless parts for 130-220°C ATEX. Internal and external ground-terminal Optional: Series or EOL-Resistors Cable glands for wire & hose Max. Surface short Peak temperature: 220-230°C High Temperature-Silicone-seal, Ceramic Wiring block Bespoken Custom-made: > Free Choice of Fenwal...

HDL6 – 60-130/ 60-210/220°C Heat Detector LICO – with Ex-d - certified Box & Cable glands www.prevent-a-fire.eu HDL-6-EX , 60-130 and 60 - 210/220°C max Free Choice of Fenwal Detect-A-Fire switches, Temperature range: 60 – 232°C Product description: Aluminium housing 120 x 120 x 83mm Fenwal-Switch of free Choice 1 or 2 Special-Stainless steel or Ni-brass Cable Glands Ceramic wiring Block with only stainless parts for 130-220°C ATEX. Internal and external ground-terminal Optional: Series or EOL-Resistors Cable glands for wire or wire & hose Ex-until 130°C with Special O-Ring 210°C / 220°C...

-L Lid grounded, special silicone covered grounding device -KK Ceramic Wiring Terminal (-70/+200°C / +500°C) en lieu Ex-Plastic Wiring Terminal (which max 135°C) - this option only for HDL5 -oil Oil-resistant mounting of Temperature-switch and Cable gland -S Series-resistor (-S) Value in Ohms -EOL (End of Line)-Resistor, Value in Ohms -SMB Detector-switch mount in body instead of lid-mounting, double thread detectors are mounted LICO Electronics GmbH, Klederinger Str. 31, A-2320 Kledering, Austria office@lico.at www.lico.at LICO Hungaria Kft, Raba u.4, H-2030 Erd, Hungary office@lico.hu /...

DAF – DETECT-A-FIRE ® Available Standard Part numbers for DAF-switches: Single Thread units: Brass & Stainless Steel or Fully Stainless steel N/C (2-Wire) opens at temperature rise or N/O (4-Wire) closes at temperature rise DAF - Detect-a-Fire / Heat & Fire-Detector 2-wire unit N/C, Opens at Rise Sensor Housing Stainless Steel Body Brass Body Stainless 27120-000-140 27120-022-140 27120-000-160 27120-022-160 27120-000-190 27120-022-190 27120-000-210 27120-022-210 27120-000-225 27120-022-225 27120-000-275 27120-022-275 27120-000-325 27120-022-325 27120-000-360 27120-022-360 27120-000-450...

ATEX-certified & special Switches 17343-124 -xxx, Temperatures: (100F), 140F - 725F, CE/ATEX Approved for Group II, Category 3 Gas, Type of protection: “nC” Unit is hermetically sealed. 60°C - 385°C Make in full stainless-steel Contacts N/O, close with increase of temperature Rating, 28VDC, 0,5A, 125VDC, 0,5A Mounting: ¾”-14 NPT 17343-124 17343-124 17343-124 17343-124 17343-124 140F, 325F, 425F, 600F, 725F, Datasheet on request 60°C 165°C 218°C 315°C 385°C 17343-113 -600, 17343-113 -950, 2 Temperatures: 600F, 950F = 315°C, 510°C Flamesafe bis 2000°F/1082 °C for short periods 600°F UL Listed...

HDL1 – 200/220°C Heat Detector LICO – HDL4 – 385°C High-Temperature-Heat Detector HDL-4 , 385/510°C-VHT, the Very High-Temperature-solution based on Fenwal 116317 Housing and Fenwal Detect-A-Fire-Sensors HDL-4 with 250°C ¾” NPT-Flextube or 385°C with solid ¾” NPT-Iron-tube and even up to 510°C For Details consult LICO 116317 Datasheet. T-max 510°C with iron-tube and extra long Heat-Detector cables or 200°C with Std-Ceramic wiring block or 385°C with Special V2A Wiring-Block or 510C with Fenwal Special Temperature switch ATEX and IP-rated High-temperature - tubes on request HDL-1 Our...