LICHTGITTER COMBI-DECK
7Pages

 LICHTGITTER COMBI-DECK    COMBINES PERFECTLY THE ADVANTAGES    OF GRATINGS AND CHEQUER P

COMBI-DECKS AND CHEQUER PLATES FOR YOUR APPLICATION: Working platforms Mounting platforms Floor coverings COMBI-DECK – GRATINGS WITH ON TOP WELDED CHEQUER PLATES COMBINE IDEALLY THE ADVANTAGES OF BOTH PRODUCTS. IN ADDITION TO CUTTING CHEQUER PLATES INCLUDING COUNTERSUNK HOLES, FURTHER PROCESSING AND COMPLETE TECHNICAL DOCUMENTATION, GREAT SPANS CAN NOW ALSO BE BRIDGED WITH RELATIVELY LOW NET WEIGHT AND WITH ONLY FOUR SUFFICIENT FIXING POINTS. YOU CAN BENEFIT FROM OUR EXPERIENCE OF VARIOUS PROJECTS WITH SEVERAL THOUSAND SQUARE METERS. THE POSITIVE FEEDBACK OF OUR CLIENTS SPEAKS FOR ITSELF...

Combi-Decks with a welded kick flat Chequer plate (also with plain sheet possible) (Pressure-locked or Forge-welded gratings) Crossing from gratings to combi decks with plain sheets   SO MANY ADVANTAGES –  ONLY ACHIEVABLE BY THE LICHTGITTER COMBI-DECK   + ridge-over of large spans at relatively low net weight, B therefore lower assembly costs + assembly of the fixings Easy (only 4 fixings per grating are necessary) + Increase of the clear span by 30 % + Elaboration of verifiable statical calculations for walkable and accessible coverings (due to the high loading capacity of combi-decks...

Grating Type approx. galv. weight kg/sqm LOAD TABLE COMBI-DECK FIXING MATERIAL   2.FIXING MATERIAL B133T    1.FIXING MATERIAL B433T   This type of fixing can be installed from above and prevents slippage of gratings from the support, even when the screw loosens. This fixing is suitable for pitches up to 25 mm. Consisting of: • top clamp with fixed, connected, threaded bush • threaded bolts This entire fixing unit can be supplied in stainless steel. PEDESTRIAN TRAFFIC F uniformly distributed load in kN/sqm v fFv deflection in mm at load Fv F concentrated load in kN uniformly distributed p...

  LICHTGITTER - CHEQUER PLATES   CHEQUER PLATES OFFER AN EASY ACCESS FOR VEHICLES AND COMBINE A CLOSED SURFACE WITH AN ANTI SLIP EFFECT (RATING GROUP R11). THEY ARE IDEALLY SUITED FOR PLATFORMS OR AS A DESIGN ELEMENT. TRUE TO THE MOTTO “EVERYTHING FROM ONE SOURCE” WE ALSO OFFER YOU FOR YOUR INDIVIDUAL CHEQUER PLATE PROJECT AN ALL-INCLUSIVE PACKAGE IN APPROVED LICHTGITTER-QUALITY. CHARACTERISTICS • Closed, resistant and serrated surface, classification R11 acc. to German Instruction Sheet BGR 181 • Closed structure of the chequer plates allows a good roll-off behavior of wheels (even smaller...

  REFERENCES   FLOOR COVERINGS/WALKWAYS CEILING COVERINGS   LICHTGITTER – ABOUT US   A BRIGHT OUTLOOK SINCE 1929 Lichtgitter was established in 1929 in order to carry out the specialized manufacturing of gratings. By the continuous monitoring of our performance, and quality systems, together with innovation in manufacturing techniques, we have ensured Lichtgitter’s place in the forefront of manufacturers of industrial floor coverings with subsidiaries all over the world. Besides the production of pressure-locked gratings, forge-welded gratings and perforated metal planks, a various offer of...

EVERYTHING FROM ONE SOURCE: forge-welded gratings, pressure-locked gratings, perforated metal planks, GRP-gratings, combi-deck, chequer plates, spiral staircases, stairtreads, ladder rungs, hot-dip galvanisation, steel service Lichtgitter GmbH Lichtgitter Blechprofilroste GmbH & Co. KG Lichtgitter Treppen GmbH & Co. KG Siemensstraße 1 D-48703 Stadtlohn Fon + 49. 25 63.911-0 Mail info@lichtgitter.com Neckarwiesen 20 D-72172 Sulz | Neckar Fon + 49. 74 54.95 82-0 Mail sulz@lichtgitter.com Schönower Straße 6 D-16306 Casekow-Blumberg Fon + 49. 33 33 1.797-0 Mail blumberg@lichtgitter.com...