*mydirectindustry

S30-Series

Product catalog summary

Overview: The S30-Series Builders Series Submersible Sump Pump is designed for new home construction, addressing common sump pump issues with a focus on durability and efficiency. It features a 1/3 hp motor capable of handling 1/4" solids and includes a 1-1/2" discharge.

Key Features:

Quiet, heavy-duty 1/3 hp motor with dual ball bearings and a cast iron motor plate.
High suction ports to minimize jamming and high capacity flow rates.
Available in two models: Model S37 with a vertical float and Model S38 with a wide-angle float and piggyback series plug.
Includes "The Brick" sump pump platform for professional installation, part #4445000.

Construction and Design:

Oil-filled, thermally protected motor with stainless steel rotor shaft.
1/4" solids-handling capability with higher intake screening to reduce debris entry.
Bi-directional dual lip shaft seal and thermoplastic vortex style impeller for improved debris handling.
1-1/2" NPT discharge and a 10' power cord.
Water-directed flow in the cast motor plate for enhanced motor cooling.
Stainless steel fasteners and a high head of 25' shut off.

Performance Specifications:

Motor: 1/3 hp, 115 volt, 6.5 amps, 60 Hz, 3450 RPM, thermally protected.
Maximum fluid temperature: 140° F.
Model S37 dimensions: Height 13", Width 9.75", Length 9.75", Weight 14 lbs, Turn-on level 8.25", Turn-off level 2.75".
Model S38 dimensions: Height 10.5", Width 9.75", Length 9.75", Weight 14 lbs, Turn-on level 12", Turn-off level 3.5".

Performance Chart: The performance chart illustrates the pump's capacity in gallons per minute and liters per minute against total head in feet and meters, showing efficient operation across various conditions.

Contact Information: Liberty Pumps, 7000 Apple Tree Avenue, Bergen, New York 14416. Phone: 800-543-2550, Fax: 585-494-1839, Website: www.libertypumps.com

Catalog excerpts

S30 v7:S37 v6 2/9/12 12:40 PM Page 1 S30-Series Builders Series Model S38 Wide Angle Float with piggyback series plug Submersible Sump Pump 1/3 hp 1/4" Solids Handling 1-1/2" Discharge Features: • Quiet running, heavy-duty 1/3 hp motor • Dual ball bearings • Cast iron motor plate • High suction ports to reduce potential jamming • High capacity flow rates • 10' standard power cord Model S37 Vertical Float

Open the catalog to page 1

Builders Series Submersible Sump Pump The S30-Series from Liberty was designed to handle the problem areas of sump pumps in new home construction. Powered by a durable 1/3 hp motor, the S30-Series offers larger clearances around the impeller for better solids and debris handling. BASIC CONSTRUCTION • Rugged and quiet 1/3 hp motor. Oil filled, thermally • Permanently lubricated upper and lower ball bearings. • Stainless steel rotor shaft. • 1/4" solids-handling with higher intake screening - helps reduce debris from entering the pump compared to bottom suction designs. • Bi-directional dual lip...

Open the catalog to page 2

S30-Series

S30-Series

Catalog excerpts

All Liberty Pumps catalogs and technical brochures