ELV Auto-Valve Series
4Pages

ELV Auto-Valve Series Simplex pump system detects oil and water allowing for diversion of oil to a separate tank via automatic electronic valves. For use in elevator pits, vaults and other areas requiring the control of oil discharge from sump water. Features: • Pumps available in 1/2 hp, 3/4 hp and 6/10 hp • Flow rates to 95 GPM and heads to 65' (depending on model) • Single and three-phase pump models available • Complete system ships with control panel, remote alarm, level sensor, solenoid valves, junction box with disconnect, 2 reducer couplings, check valves and pump. (Systems with oil holding tank also available!) • OilTector ® control features advanced touch screen display and programming • Remote alarm can be mounted up to 2,500' from panel • Preset level sensor for easy installation • Advanced system monitors/verifies the amount of fluid pumped and that it was pumped to the correct location • Controls are available with optional BACnet Gateway for integration with building automation and control systems. Please contact Liberty Pumps for

ELV Auto-Valve Series Features and Operation: The OilTector® ELV auto-valve system pairs an advanced controller with solenoid valves to control and eliminate unwanted water from elevator sumps, garages, vaults and other areas where the discharge of oil to the environment is prohibited. The system features a heavy-duty Liberty submersible pump with oil resistant components. The OilTector® controller incorporates a programmable touch screen with a see-through door display - allowing maintenance personnel to easily view real-time system performance. A pre-set level sensor and float switch send...

Simplex Control Panel Features: Easy-to-use touch screen programming with adjustable display brightness. Control Panel Dimensional Data Clear cover panel with locking hasp. Logic in the panel monitors how much water and/or oil is pumped and verifies that it is pumped to correct location. The Simplex program is designed to run 1 pump with two solenoid valve controls. Valves open and close depending on input from the OilTector® pre-programmed sensor. An oil storage display is time-based using the pump’s gallon-per-minute rating and dimensions of the holding tank as input by the user. Data...

ELV Auto-Valve Series (2) 2" FNPT Bronze Solenoid Valves included Junction Box with Pump Disconnect NEMA 4X Complete system - includes pump, contol panel, level sensor, solenoid valves, junction box with disconnect, check valves, reducer couplings and remote alarm (no holding tank) Models Holding Tank Complete systems as above with 59 gallon oil holding tank Oil Tank included with these systems OilTector® Control System Only (No pumps or tank) Models OTC-120/230-VS OTC-230-3-VS Panel Style Above OTC control systems include control panel, remote alarm, level sensor, solenoid valves and...