Catalogs >
Liaodong Radioactive Instrument >
x-ray orientation instrument for silicon ingot sticking

x-ray orientation instrument for silicon ingot sticking
1Pages

Catalog excerpts

x-ray orientation instrument for silicon ingot sticking - 1

B&j-osmmjitimvf&sicw-MigiZfiQxsiiSM, jSMMfUR-'t: i^fe O5-20mm, MFH 5-20mm<, YX-3 Inoculating Crystal Indicator Functions: Mainly used for orientation before crystal material processed seed crystal and the seed crystal orientation after processed. This unit can be used along with ourTJ-08 rod machine. Also can be used matching with plane gr inder and the single wire cutting machine. Standard configuration as below: 1. Match with professional clamp on one side, do orientation for crystal rod end. For example, 111,110,100. S apphire A,C,R and so on. The measurement dimension is 02-8inch; remove the clamp after testing, then drill seed crystal on TJ-08 rod machine or process the end face on plane grinder, or process the seed crystal bar by fillet cutting machine, single wire cutting machine and so on. 2. Do orientation of end face for above cutted seed crystal bar on the other side; the measured seed crystal d imension: round cf>5-20mm, side length of square one is cp5-20mm. Main parameters: Satisfied with parameters for YX-2 Note: Can discuss for special requirements. Picture only for reference, the specific kind prevail.

Open the catalog to page 1