SC4TS
3Pages

DRUM HEATING CABINETS An ISO 9001:2008 Registered Company (4) Tote Heating Cabinet, Steam Standard Profile Capacity • (4) totes/ IBC tanks • 4,000 lbs. per tote LEWCO’s tote heating product line offers standard cost effective solutions for melting, viscosity reduction, elevated temperature storage and general industrial heating applications. This unit features an insulated base with integrated spill containment and is suitable for indoor or outdoor installation. All models feature our signature allwelded steel, heavy-duty construction and simple, userfriendly controls. Heating Medium • Steam, 5-200 PSIG Heat Exchanger Construction/ Features • All welded, 1/8” steel shell • Optional: Stainless steel • Insulation: 3" x 6# mineral wool • Heavy duty doors with strap hinges, 3-point latch system, and high temperature silicone rubber gaskets create a tight seal for efficient heating • Interior door release for safety Spill Containment • 175 gallon capacity • Sump drain, 1” NPT Quality Assurance • Each unit comes complete with a (3) year warranty and is fully assembled, wired, and tested prior to shipment • All heat exchangers are welded by A.S.M.E. certified welders and then hydro-tested at 300 PSIG • Standard: 238 sq. ft. • Optional: 336 sq. ft. Control Options • Electronic process and redundant high-limit controllers with modulating control valve and full voltage lockable disconnect o NEMA 12 or NEMA 7 explosion proof enclosure • Non-electronic, self-acting process controller available in the following ranges: o 85°-165°F, ½” valve o 166°-250°F, ½” valve o 251°-316°F, ½” valve Circulation Fan Options • 2096 CFM, TEFC motor with motor starter • 2096 CFM, explosion-proof motor and motor starter Installation • Ships completely assembled for easy installation • Simply connect utilities and your cabinet is ready for use Weight • Shipping weight: 8,600 lbs. Finish • Standard: Blue or gray alkyd oil base paint • Optional: Premium finish for corrosive areas Additional Options • Steam trap(s) • 5” exhaust vent with damper • Outdoor Service Package: Premium finish, door trim, and NEMA 3 enclosure.

DRUM CAPACITY: 4 TOTES PALLETIZED HEAT EXCHANGER SURFACE AREA: 238 SQ. FT.* HEAT EXCHANGER PRESSURE RATING: SPILL CONTAINMENT SUMP: 1 75 GAL SATURATED STEAM FLOW RATE BASED ON PRESSURE AND USAGE 5- 200 PSIG INSULATION: 3" X 6# DENSITY MINERAL WOOL 4.) ESTIMATED SHIPPING WEIGHT: 8,600 LBS *DESIGNATES OPTIONAL FEATURE CONSULT FACTORY FOR ADDITIONAL OPTIONS NOT SHOWN PLAN VIEW DIGITAL TEMPERATURE CONTROL, HIGH LIMIT & BATCH TIMER* WITH DISCONNECT INCLUDED IN BASE MODEL) CHART RECORDER* OVERALL DEPTH INSIDE CLEAR -DOOR SWTICH* INSIDE CLEAR "OVERALL WIDTH LEFTSIDE ELEVATION FRONT ELEVATION...

CONDENSATE DRAIN HIGH LIMIT & CONTROL -STEAM TRAP* REAR ELEVATION DESCRIPTION: DRUM HEATING CABINET THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED, REPRODUCED OR USED FOR ANY PURPOSE WITHOUT THE WRITTEN CONSENT OF LEWCO, INC. ALL RIGHTS RESERVED.