MSCC, Multi-Strand Chain Conveyors

Product catalog summary

Specifications:
The Multi-Strand Chain Conveyor (MSCC) is designed for handling pallets with non-conveyable bottom configurations on roller conveyors. It features sealed pre-lubricated cast iron flange ball bearings and a standard C-2060H roller chain guided by a UHMW track. The frame is constructed from 12-gauge formed steel with bolted crossties. The drive and take-up sprockets have a pitch diameter of 3.228 inches, made of steel, and are mounted on shafts with flange bearings. Adjustable supports are available.

Available Accessories:
The conveyor can be configured with 2, 3, or 4 strands. It supports chain centers ranging from 15 to 60 inches, lengths from 48 to 600 inches, speeds from 10 to 60 feet per minute, and elevations from 12 to 60 inches. Drive options include end drive between strands, with various motor configurations available, ranging from 1/2 HP to 2 HP, in different voltage and phase options. Guard rails are not included in the standard configuration.

Additional Features:
The MSCC is suitable for extreme environments due to its minimal moving parts and low maintenance requirements. It includes electrical controls such as magnetic starters, combination starters, and DC variable speed drives. Safety features include a lanyard emergency switch and various sensors. The finish is a blue powder coat, and stainless steel construction is available.

Contact Information:
LEWCO, Inc., 706 Lane Street, Sandusky, OH 44870. Phone: 419-625-4014, Fax: 419-625-1247, Email: [email protected], Website: www.lewcoinc.com

Catalog excerpts

706 Lane Street Sandusky, OH 44870 Phone:419-625-4014 • Fax:419-625-1247 Email: [email protected] • Website: www.lewcoinc.com Item # MSCC, Multi-Strand Chain Conveyors Model MSCC, multi-strand chain conveyor, is a drag chain conveyor typically used for pallets with bottom configurations not conveyable on roller conveyors. Its design is suitable for extreme environments because of the low number of moving component parts and limited amount of required maintenance. Specifications · Available Accessories Specifications Bearings Roller Chain Frames (FRAME) Drive Sprocket Take-Up Sprocket Supports Available Strands, Number (NS) Minimum Chain Center (CC) Available Length (LG) Available Speed (SP) Available Beginning Elevation (BE) Available Ending Elevation (EE) Drive (DRIVE) Sealed pre-lubricated, cast iron flange ball bearings. Standard C-2060H chain guided by UHMW track. 12 ga. formed steel with bolted 6" x 1-1/2" x 8 ga. crossties. 3.228" pitch dia., steel on a 1-7/16" shaft mounted in 2 bolt flange bearing. 3.228" pitch dia., steel with internal ball bearing mounted on a .667" diameter shaft. SPH adjustable supports. 2 3 4 15-60 48-600 in 10-60 ft/min 12-60 in 12-60 in (D31) End Drive, Between strands D30 & D31 Drive Option Image larger image D33 & D34 Drive Option Image larger image Drive Options D35 & D32 Drive Option Image larger image Guard Rail (GDRAIL) Motor (MOTOR) Support Centers (SUPCC) Finish (FINISH) Available Accessories Electrical Controls: magnetic starter, combination starter, DC variable speed drives. Lanyard emergency switch, photo-eye and various part sensors. Stainless steel construction. Walkover plates

Open the catalog to page 1