Galvanic 0-10V isolator
3Pages

Levtech Service & Prodtuction SRL Brief descrip on The LSP-IV1 isolator is designed to make galvanic isolation between the transmitter and the processing unit (PLC). This isolator is a 2 point galvanic isolator, which means that the input and the output is separated from each other. This instrument is suitable for any industrial application where 0-10V analog signal is used. It reduces the impact of interference and ground potential differences. The module ensures 3500VDC isolation. Two way isolated 3500kV isolation TS-35 DIN rail mounting +/-0.1% accuracy Ip40 case Screw terminals Power LED 0-10V analog output Cost effective Lueta Nr. 319, Romania +40758576007 office@levtech.ro www.le

Levtech Service & Prodtuction SRL Inputs Input signal : Input range: Input resistance: Environment Direct voltage 0-10V 500 Ohm Power supply Outputs Output signal : Output range: Output resistance: Nonlinearity : Output accuracy: Ambient temperature: -10 to +60 °C Storage temperature: -30 to 80 °C Humidity : 0 to 95% RH at 40 °C, no condensa on Supply voltage 16 to 30 VDC Power consump on < 100mW Reverse-polarity protec on Galvanic isolation 3500 VDC isola on between input and output Enclosure Ra ng: IP40 Dimension: 165 (L) x 190 (D) x 12.5 (H) Weight: approx. 50g DIN rail mountable housing...

Levtech Service & Prodtuction SRL Lueta Nr. 319, Romania +40758576007 office@levtech.ro www.levtech.ro