PRO3600 : Digital Inclinometer 0.01°, with RS232 Output

Product catalog summary

Product Overview
The PRO 3600 Digital Protractor is an advanced measuring tool designed to provide immediate digital readings of angles across a full 360° range. It features a precision-machined aluminum frame that is both lightweight and rigid, ensuring high accuracy in measurements. The frame includes grooves for use with round objects and threaded holes for secure attachment.

Key Features

Measures angles over a complete 360° range with a standard reference of 0.00°.
Includes an 'ALT ZERO' button for differential readings and a 'HOLD' button to freeze readings.
Allows for simple user re-calibration to maintain factory accuracy.
Equipped with an RS232 interface for data logging or remote operation.
Automatic power shutdown feature for energy saving, which can be disabled.

Specifications

Resolution: 0.01° (±10° from level), 0.1° (rest of range).
Accuracy: ±0.05° (±10° from level), ±0.1° (±10° from plumb), ±0.2° (rest of range).
Repeatability: ±0.05°.
Time Constant: 0.4 seconds.
Power: Operates on a 9V PP3 battery, lasting up to 500 hours.
Serial Port: RS232 protocol, 5V voltage, 9600 baud rate, 10Kohm output impedance, 10-pin rectangular connector.
Dimensions: 152.8 x 48.3 x 30.9 mm (W x H x D).
Weight: 295g.
Temperature Range: Operating between 5 to 50°C, storage between -20 to 65°C.

Additional Information
The device is supplied with a rigid plastic case for protection and features an automatic power-down function to conserve battery life, which can be disabled if continuous operation is required.

Catalog excerpts

PRO3600 : Digital Inclinometer 0.01°, with RS232 Output-1

level developments PRO3600 : Digital Inclinometer 0.01°, with RS232 Output The PRO 3600 Digital Protractor is a revolutionary measuring tool that provides an immediate, digital reading of all angles in a 360° range. • Measures over full 360° range • Standard reference = 0.00° • ALT ZERO’ button for differential readings • HOLD’ button to freeze reading • Simple user re-calibration procedure to restore factory accuracy • RS232 Interface for datalogging or remote operation • Automatic shutdown for power save (can be disabled) Product Description A precision machined aluminium frame provides a rigid, lightweight, ultra-precise platform for extremely accurate measurements. The frame is grooved along the bottom surface to facilitate use with round objects such as pipes or shafts and incorporates threaded holes on the bottom for rigid attachment if desired. The front panel buttons can be used to capture desired readings or to designate an alternate reference surface from which subsequent angles are then measured. The unit can also be easily recalibrated in the field to factory accuracy using any available flat surface. The unit operates for up to 500 hours on a single 9V battery, incorporates an automatic power down feature (which can be disabled), and is supplied as standard with a rigid plastic case for protection. Level Developments Ltd. 97-99 Gloucester Road Croydon, Surrey, CR0 2DN United Kingdom [email protected] www.leveldevelopments.com

Open the catalog to page 1