level developments PDTS : Dual Axis Panel Mount Display And Tilt Switch Features • 4 Digit LED Display. High contrast with wide viewing angle, and adjustable brightness • Dual axis simultaneous display • Programmable alarm function with 2 individually programmable relay outputs • Compatible with many of our inclinometer sensors • Display resolution adjustable with 0, 1,2 or 3 decimal places) • USB interface with free Windows based application for monitoring angle and configuration • Sturdy low profile aluminium Housing • Designed for panel mounting. IP65 sealed from front side when mounted with gasket and clamps supplied. • Operating temperature -40 to +85°C • RoHS compliant Level Developments Ltd. Croydon, Surrey, CR0 2DN t : +44 (0)20 8684 1400 [email protected] 97-99 Gloucester Road United Kingdom f : +44 (0)20 8684 1422 www.leveldevelopments.com

PDTS : Dual Axis Panel Mount Display And Tilt Switch X Axis Tilt Switch LED Indicator Y Axis Tilt Switch LED Indicator Menu Select Button X Axis LED Angle Display Y Axis LED Angle Display Level Developments Ltd. Croydon, Surrey, CR0 2DN t : +44 (0)20 8684 1400 [email protected] 97-99 Gloucester Road United Kingdom f : +44 (0)20 8684 1422 www.leveldevelopments.com Micro USB Port Mounting Holes (2xM4) Power Connection Tilt Switch Relay Connection Sensor Connection (Power + RS232)

level developments PDTS : Dual Axis Panel Mount Display And Tilt SwitchDimensions Level Developments Ltd. Croydon, Surrey, CR0 2DN t : +44 (0)20 8684 1400 [email protected] 97-99 Gloucester Road United Kingdom f : +44 (0)20 8684 1422 www.leveldevelopments.com

PDTS : Dual Axis Panel Mount Display And Tilt Switch level developments Panel Mounting Cutout dimensions Level Developments Ltd. Croydon, Surrey, CR0 2DN t : +44 (0)20 8684 1400 [email protected] 97-99 Gloucester Road United Kingdom f : +44 (0)20 8684 1422 www.leveldevelopments.com

The display is compatible with all of our inclinometers that use the standard Level Developments communication protocol over RS232. These sensors include the models listed below: LCH-45 Series o Dual Axis, ±45° o RS232 interface o Low cost (<£25 for 1 kpcs) o Small size, 46 x 43.5 x 13.5mm o Aluminium housing Sealed to IP65 o Braided screen 4 core PUR cable o CE certified and RoHS compliant. SOLAR-2 Series o Dual axis measurement range from ±5 to ±45° o High resolution and accuracy o Low temperature drift o RS232 interface o Tough sealed anodised aluminium housing (IP67) o CE certified and RoHS...

The device is supplied with a Windows based configuration application that can used to setup the device and display the angle. The display connects with a USB interface. It uses a the standard HID USB protocol so there is no need for any additional drivers as it utilises the standard Windows plug and play HID drivers. If another power supply is not connected the device and the attached sensor will be powered from the USB port Using this application it is possible to configure: • LED Brightness • Number of decimals shown on display • Lock (disable) the front panel buttons • Adjust the sensor Frequency...

level developments PDTS : Dual Axis Panel Mount Display And Tilt SwitchFront Panel Menu Operation The device has three buttons on the front panel: Menu Select Button Up Menu Button Down Menu Button Using this front panel buttons it is possible to set and cancel the relative zero (tare). For more detailed control and configuration of the device it is necessary to use the free Windows application and the USB interface. Set and Cancel Relative Zero (Tare) • To enter the menu, press and hold the menu button for 4 seconds • Use the up and down arrow keys to switch the tare on or off • Press the menu...