Optical Distance Sensors
24Pages

LEUZE ELECTRONIC

OPTICAL DISTANCE SENSORS PRECISE MEASUREMENT In highly automated systems in intralogistics and production, precise monitoring and measurement of distances is essential for smooth running in daily operation. SELECTION GUIDE Page 5  Distance sensors are used for this purpose in, for example, object measurement, quality assurance in assembly lines or for collision protection of shuttles. We offer a comprehensive product range of optical distance sensors that enables pinpoint measurement, positioning and quality assurance of any objects over long and short distances. PRODUCT OVERVIEW Page...

LEUZE ELECTRONIC TAILOR MADE Depending on requirements, sensors with various operating ranges, resolutions and reproducibilities are needed. To optimally cover the needs, we use various technologies in our sensors that are based on proven measurement procedures. Triangulation measurement With triangulation measurement, the laser beam is reflected by the object. This is incident on a high-resolution receiving array. The distance to the object is determined based on the point of incidence. This process is suitable for ranges up to approximately one meter and if very high resolutions are...

Operating range and resolution are the most important criteria when selecting the right measuring sensor. For positioning applications, reproducibility is another important factor. Because sensor systems need to be integrated in machines and systems in a space-saving manner, the size is also of great relevance. AT A GLANCE – THE RIGHT SENSOR OPTICAL DISTANCE SENSORS Operating Dimensions range Operating Dimensions Page range SUITABLE PRODUCTS 

leuze electronic APPLICATIONS Object measurement Requirement: During machining processes, the raw material must be prepared in the same width for further processing. To facilitate this, the width is constantly measured on the materials handling system - in a higher or lower resolution depending on the object. Solution: The ODSL 8 and ODS 9 sensors with different resolutions and operating ranges enable the measurement of objects of any size and shape. Material thickness measurement Requirement: To ensure an optimum punching process, the material thickness must be checked. This is performed...

OPTICAL DISTANCE SENSORS Stack height measurement Requirement: With machining processes, the raw material must be fed into the machine without interruption. To ensure this, the stack height on the load carrier must be constantly detected. Solution: Our wide selection of distance sensors with various resolutions and operating ranges enables height measurement of different stacked objects. Sag/loop control Requirement: If, during clocked processes, raw material is fed in from coils, loop control must be performed to compensate for feed fluctuations. To do this, it is necessary to check...

LEUZE ELECTRONIC APPLICATIONS Load positioning with shuttles Requirement: In a warehouse, Solution: Thanks to their pallets of many different colors by shuttles. To avoid collisions sensors can easily be integrated here, a certain spacing must in shuttles. Through time of flight measurement, the distance is detected independent of color. Push-through protection Requirement: To avoid a pallet warehouses, the pallet sensors detect the pallet foot and its movement must foot at a range of up to eight be reliably detected from long meters thanks to their focused laser. With switching product...

OPTICAL DISTANCE SENSORS Collision prevention for cranes Requirement: When cranes and trolleys move towards one another, they must be braked In a timely manner at a minimum distance of a few meters to avoid colliding. Solution: The ODS 10 and ODSL 96 sensors are suitable for checking the minimum distance between the devices thanks to their large operating range of up to 25 meters against a reflector, Positioning Solution: Thanks to their large operating ranges of up to 65 meters and a focused laser, the ODSL 30 and ODS 10 sensors are suitable for positioning, Models with and without...

LEUZE ELECTRONIC HRT 25B/L Especially small distance sensor with an operating range of 3 m and 2 switching points Single-depth/double-depth compartment occupation check with containers Collision protection Phase measurement Advantages for you SMALL SIZE HIGH ENERGY LARGE LIGHT SPOT Fast alignment and reliable sensor with 2 switching Very lower power surfaces through especially large IR light spot Operating range up to 3 m on objects Sensor with 2 push-pull switching outputs Fast detection of the switching state by means of Simple configuration via teach button or IO-Link Fast alignment...

OPTICAL DISTANCE SENSORS ODSL 8 High-resolution, measuring distance sensor in metal housing for operating ranges of up to 500 mm Areas of application ■ Height / width measurement ■ Quality assurance in assembly lines ■ Sag control of belts and films Operating principle ■ Triangulation with CCD line Features ■ Staggered operating ranges: 25 - 45, 20 - 200, 20 - 500 mm ■ Reproducibility: 0.2 - 0.5 mm ■ Resolution: 0.03 mm, 0.1 mm ■ Dimensions: 15 x 38 x 38 mm ■ Signal output: current output, voltage output, 2 I/Os ■ Detection of structured objects through various light-spot geometries (1 x 1...

LEUZE ELECTRONIC ODS 9 High-resolution, measuring distance sensor with display for operating ranges of up to 650 mm Areas of application  Height / width measurement Quality assurance in assembly lines Triangulation with CCD line Advantages for you VERY FLEXIBLE VERY ROBUST Configurable analog output Glass fiber reinforced plastic Integrated IO-Link Smart (voltage/current) replaces Sensor Profile in all product multiple devices highest application require- variants enables simple Support of the IO-Link Smart Sensor Profile for direct PLC integration Configurable analog output for U/I and 1...

OPTICAL DISTANCE SENSORS FAST COMMISSIONING Teach button for each switching point enables adjustment directly on the device ODS 110 / HT 110 Distance sensors in measuring and switching versions with an operating range of 5 m Areas of application ■ Double-depth compartment occupation check ■ End of aisle detection ■ Collision prevention of shuttles Operating principle ■ Time of flight measurement Features ■ Operating range of 0.1 - 5 m on bright objects and 3 m on dark objects ■ Reproducibility: 1 - 2 mm ■ Resolution: 1 mm ■ Dimensions: 23 x 50 x 50 mm ■ Signal output: current output,...