Inhalt / Content The LEUCO Optimizing Chop Saw Blade family was optimized especially for clipping and cross cuts in solid woods, MDF and HDF ledges on manual or automatic optimizing chop saws. The novelties are extreme cutting angles of 40° and a large shear angle of +5°. Special attention was given to the tool body stability and the increase of edge lives, thus higher productivity and economic efficiency. I undertable cross-cut saws I push-feed saws I through-feed saws, e.g. DIMTER Opticut „C", „S 90”, ..Quantum" and PAUL machines I Cutting material: HL Board 06 for longer edge lives I WSA cutting geometry: WS 40° and shear angle of +5° I more robust tooth bodies to avoid cracks in the saw blade body I thicker teeth I exact bore tolerance H7 for a HW saw blade (reduction of vibration and thus increase of edge quality) DIMTER QUANTUM DIMTER DIMTER DIMTER The improved Optimizing Chop Saw Blade program by LEUCO; the detailed picture clearly shows the extreme cutting angle of 40°. no marking — immediately available o — available on short notice # — new type in process & — modification and/or mounting of stock parts s — production per drawing (custom made tool) $ — Superstandard