RTC-M1 Rain Test Chambers

Product catalog summary

Overview
Letra Co, Ltd. offers rain test chambers designed for testing the watertightness of mechanical and electrical devices, cables, and connectors. These chambers comply with MIL-STD-810G/H standards and IEC 60529 for Ingress Protection Tests (IPX3 to IPX6).

Applications

Device/Cable Assembly Watertightness Testing
Military Specification (810G) Rain Testing
Ingress Protection Tests (IPX3, IPX4, IPX5, IPX6)

Key Features

MIL-STD-810G Rain Test (Exaggerated Rain and Drip)
Cost-effective solution
Stainless Steel 304 construction
High-quality brass full-cone nozzles
Double pump system for equal wear
Touchscreen HMI control unit
Mobile with castor wheels

Technical Specifications

Model: RTC-M1-020 and RTC-M1-023
Overall Dimensions: 2678 mm (W) x 3066 mm (H) x 2226 mm (D)
Interior Dimensions: 2460 mm (W) x 2210 mm (H) x 1880 mm (D)
Test Specimen Dimensions: 1000 mm (W) x 1000 mm (H) x 400 mm (D)
Weight: RTC-M1-020 < 1500 kg, RTC-M1-023 < 1800 kg
Circulation Tank Capacity: 240 liters
Operating Voltage: AC 220V
Pump Power Consumption: 2.2 kW for exaggerated test, 0.15 kW for drip test
Operating Temperature: 10 – 40 °C
Storage Temperature: -10 – 55 °C
Control Unit: PLC with 7” Touchscreen HMI

Materials

Interior: Stainless Steel 304
Exterior Finish: Powder-coated steel
Nozzles: High-quality brass full-cone

Miscellaneous

Warranty: Standard
Viewing Windows: Three glass windows (60 cm x 60 cm)
Max Allowable Specimen Weight: 300 Kg
Mobility: Four castor wheels with brake
Emergency Stop: Standard

Accessories (Optional)

IP X3, X4 Nozzle Heads: Handheld water spray nozzle
IP X5, X6 Nozzle Heads: Handheld water jet nozzle
Base Table and Hanging Apparatus for Test Specimens: Custom production

Catalog excerpts

Rain Test Chambers For MIL-STD-810G/H and IP Watertightness Tests Our rain test chambers are designed for testing of watertightness of several mechanical and electrical devices, cables, connectors etc. These chambers meet the requirements of the MIL-STD-810 G/H Standard (Method 506.6 Procedure II, III) which defines required tests, for military use. Within the scope of test procedures described in the standard, the chambers reproduce exaggerated rain (procedure II) and drip type (procedure III) water falls (as rain droplets) on the test item. The units are also suitable for Ingress Protection Tests (IPX3, IPX4, IPX5 and IPX6) according to the IEC 60529 standard. APPLICATIONS Device/Cable Assembly Watertightness Testing Military Spec (810G) Rain Testing Ingress Protection Tests (IPX3, IPX4, IPX5 and IPX6) in IEC 60529 KEY FEATURES MIL-STD-810G Rain Test (Exaggerated Rain And Drip) Cost-Effective Solution Stainless Steel 304 for All Water Contact Surfaces and Mainframe Construction High Quality Brass Full-Cone Nozzles Double Pump System (for Equal Wear) Touchscreen HMI Control Unit Three Large Windows Mobile with Castor Wheels www.letra.com.tr ©2022 Letra Co, Ltd. All rights reserved.

Open the catalog to page 1

Rain Test Chambers For MIL-STD-810G/H and IP Watertightness Tests TECHNICAL SPECIFICATIONS Model Designation General Overall Dimensions Interior Dimensions Test Specimen Dimensions Cabinet Type Door Dimensions Weight Circulation Tank Capacity Test Methods Exaggerated Rain Test (MIL-STD-810G Method 506.6 Procedure II) Drip Test Area Materials Interior Fasteners Exterior Finish Nozzles Electrical Operating Voltage Pump Power Consumption (Exaggerated Test) Pump Power Consumption (Drip Test) Number of Pumps (Alternating Pumps for Equal Wear) Lighting Environmental Operating Temperature Storage Temperature...

Open the catalog to page 2

Rain Test Chambers For MIL-STD-810G/H and IP Watertightness Tests DIMENSIONS Stainless Steel IPX3, IPX4 Nozzle Heads High Quality Brass IPX5, IPX6 Nozzle Heads www.letra.com.tr ©2022 Letra Co, Ltd. All rights reserved. Updated Jun. 1, 2022 Specifications are subject to change without notice

Open the catalog to page 3

RTC-M1 Rain Test Chambers

RTC-M1 Rain Test Chambers

Catalog excerpts

All LETRA catalogs and technical brochures