1. Catalogs
  2. Lestoprex AG
  3. Emulsion mixing unit

Emulsion mixing unit

Emulsion mixing unit

Emulsion mixing unit

Product catalog summary
Overview: The document describes the Emulsion Mixing Unit Series S, which includes models S-1502A, S-1520, and S-1540. These units are designed for creating stable emulsions through continuous dosing using the Injector Venturi Principle. They are noted for their low maintenance and cost-effective operation.
Specifications:
  • Models: S-1502A (Automatic), S-1520, S-1540 (Standard)
  • Flow Rate: Approximately 1000 liters per hour for all models
  • Concentration Range: 0 to approximately 20% for S-1502A and S-1520, 0 to approximately 40% for S-1540
  • Water Pressure: 2.5 to 6 bar
  • Water Inlet: 3/4 inch
  • Material: Aluminum casing
  • Dimensions: S-1502A: 200 x 80 x 200 mm; S-1520 and S-1540: 120 x 50 x 110 mm
  • Weight: S-1502A: approximately 5 kg; S-1520 and S-1540: approximately 3 kg
Functionality: The units can be mounted directly onto a barrel with a 2-inch sleeve or attached to a wall using an optional mounting kit. They operate by creating a vacuum through water flow pressure, which allows the water-mixable coolant to be sucked in and mixed, resulting in a homogeneous emulsion.
Key Features:
  • Continuous adjustment of additive mix
  • Significant savings on cutting oils or emulsions
  • Extended service life of the emulsions
  • Low maintenance requirements
  • Simple and cost-effective operation
Contact Information: Lestoprex AG, Kronenstrasse 11, CH - 8735 St.Gallenkappel, Tel. +41 (0)55 284 51 51, Email: [email protected], Website: www.lestoprex.ch
See more

Catalog excerpts

Emulsion mixing unit-1

Emulsionsmischgerät Doseur et mélangeur Emulsion mixing unit

 Open the catalog to page 1
Emulsion mixing unit-2

Stabile Emulsion durch stufenlose Dosierung Réglage continu du mélange d‘additif Continuous adjustment of additive mix Injektor-Venturi Prinzip Principe de pompe à jet Venturi Injector Venturi Principle Économise du lubrifiant réfrigérant Savings of cutting oils or emulsions Mehrfache Verlängerung der Standzeiten Prolongation multiple des durées de maintien Repeated extension of the service life Einfacher und kostengiinstiger Betrieb Fonctionnement simple à peu de frais Simple and low-cost operation Das Gerät kann entweder mittels 2“ Muffe direkt auf das Fass mit dem Konzentrat geschraubt oder...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.