INDUSTRIAL BRUSHES SiVwi.

Brushes with carbon fibre INDUSTRIAL BRUSHES Brushes with carbon fibre for electrochemical cleaning To use in machines for cleaning weld seams Due to oxidation on stainless steel surfaces temper colour is a result from heating. Hence often a post-treatment of the surface is necessary to reestablish the original character. End brushes with carbon fibres are used in special machines for cleaning weld seams. The typical electrochemical jobs are the following: Cleaning To remove tepering colour and scales on stainless steel surfaces, e.g. on weld seams. Polishing For polishing stainless steel surfaces....

H i g h Performanc e Filam ent Br ushes HFB Disc Brushes LESSMANN high performance surface finishing tools achieve excellent deburrings and edge radiusing on exterior and interior areas of work pieces. Next to the applications in machining centers, especially in linear deburring and finishing lines with planetary brush systems HFB brushes obtain high efficiency. They are used for e.g. for the deburring of • blanked parts • sintered parts • hydraulic and pneumatic work pieces • aluminium work pieces • and many more Filling material In a special production process LESSMANN HFB brushes are manufactured...

High Performance Filament Brushes l| HFB Disc Brushes, full body, SIC Enquiry for High Performance Filament Brushes Drawing / description of application Piece number_ Brush Application EH dry EH wet EH deburring EH others_ Material to be treated_°C Temperature EH steel EH aluminium EH stainless steel EH others_ Filling material EH abrasive filament (SIC) EH abrasive filament (AO) EH abrasive nylon (KK) EH diamond grit (DIA) Diameter of filling material_ filling placement INDUSTRIAL BRUSHES sender: company, contact person [email protected] www.lessmann.com turbo right / left (standard right) Please...

Disc Brushes – Measurements DA Please inform yourself on the following pages and do not hesitate to contact us for personal advice! thin filling material mean desity of filling material Possible placement of brush filling material for Wheel Brushes and Wide Face Brushes, Disc Brushes and Lath Brushes Trim height dense filling material Body height mm Possible desities of brush filling material for Wheel Brushes and Wide Face Brushes, Disc Brushes and Lath Brushes External diameter Staple Set Brushes For applications with little mechanic load, brushes in a staple set edition are produced. Typical...

Disc Brushes Filling STA 0.20 | 0.008" SIC 180/1.0 SIC 180/1.0 SIC 120/1.1 Mixed filament STA 0.30 / PA 0.35 ^ Disc Brushes for the wood machining mm | inch mm | inch mm | inch SIC 46/1.6 130 | 51/8 20 | 3/4 50 | 2 Circular Discs - Standard Body - Measurements (in Stock) Body Material PP (red) dl Bore 22.5 / 19 Bore 12 Bore 35 / 25, mounting hole 2 x 011, TK 56 Thread M12 Thread M12 left Bore 12 Bore 35 / 25, mounting hole 2 x 011, TK 56 Bore 40 Brush intake with shank The standard bodies can be adapted on demand (dress to size, drill) for receiving other measurements. LESS MANN* Enquiry for...

Lath Brushes Lath Brushes - Measurements KB KL KD H Deviation Body Filling Filling mm mm mm mm of the Bristles Material Material Density Steel Wood, ROF, PP, PE, PA, mean, 8 - 135 Stack wood FIB, ROS, SIC, AO dense Lath Brushes Lath Brushes work in machines and are used for clearing, cleaning, insulating and discharging electric charges etc. Various body materials are possible: including wood and plastic. The filling material can be manifold and goes from fine horsehair to firm steel wire. Through the deviation of the bristles until 35° the lath bushes are very flexible in their applications....

Wheel Brushes and Wide Face Brushes Staple Set Wheel and Roller Brushes - Measurements D KD KL Ad Body Filling Filling mm mm mm mm mm Material Material Density 45 - 440 25 - 250 5 - 800 3 - 780 freely selectable PP, PE, PA, STA, STM, MES, thin, steel Wood ROF, PP, PE, PA, mean, plastic Standard body diameter (on stock) in body material PP 50, 80, 100, 140 Staple Set Wheel and Roller Brushes These brushes are used for cleaning, deburring, surface finishing, structurizing, smoothing and transporting. The brush body is of wood or plastic. The filling material is determined by the brushes purpose....

S t r ip br ushe s f or slot s / prof ile s I NDUS T R I AL B R US HE S Strip brushes Strip brushes can be used in many ways. Strip brushes have very dense and close filling and thus they can help to save energy with long lifetime. They seal gates and doors and prevent of infiltration, cold, humidity, leaves and dirt. They also protect moving parts (installation in machines and systems) from dust and other undesirable particles. Strip brushes also can be used for transport, guiding and securing of sensitive objects. Strip brushes from Lessmann are available in different shapes and with different...

Strip brushes for slots / profiles Strip Brushes with H profile, aluminium Brushes for deburring machines Special Strip Brushes as component part of deburring machines. The brushes give the workpieces to be machined a straight run during machining. Item Nos. in bold are available ex stock. Consider our minimum order value for italic printed article numbers (see page 164). STA = steel wire ROF = stainless steel wire PA = polyamide ROS = horse hair Sealing Brushes with top and lower mounting plate l| Sealing Brushes with top mounting plate mm | inch mm | inch mm | inch mm | inch mm | inch ^ Sealing...

E nquir y f or S t r ip B r ushe s Piece number:___________________________ Drawing / description of application Brush application sealing sloughing deburring cleaning roughening transporting other _____________________________ Material to be treated ____°C Temperature steel aluminium wood stainless steel Für diese Zeichnung behalten wir uns alle Rechte vor. Ohne unsere vorherige Zustimmung darf sie weder vervielfältigt noch Dritten zugänglich gemacht werden und sie darf durch den Empfänger oder Dritte auch nicht in anderer Weise mißbrauchlich verwendet werden. Lessmann GmbH plastic other _____________________________...