Overview of Rubber Sustainers (TVAD-DS/TVA/TVAD10/TVAR/TVAPL)

This document provides technical specifications and selection criteria for various types of rubber sustainers used in compression applications. The sustainers are categorized under different model codes: TVA, TVAD10, TVAR, TVAPL, and TVAD DS.

1. Product Categories and Models

• TVA Series: Models 40, 60, 75
• TVAD10 Series: Corresponding to TVA models with D10 suffix
• TVAR Series: Models 40, 60, 75
• TVAPL Series: Models 40, 60, 75
• TVAD DS Series: Models 40, 60, 75

2. Compression Load and Deflection Specifications

Each model is characterized by its compression load capacity and deflection parameters, summarized as follows:

3. Key Parameters and Recommendations

• Compression Load: Ranges from 8 kg for size 40 models up to 25 kg for size 75 models.
• Deflection Range: The sustainers allow deflection from 1 mm minimum to 3 mm maximum, with total deflection capacity varying by model (25 mm, 50 mm, 75 mm).
• Selection Guidance: Choose the sustainer model based on required load capacity and deflection range to ensure optimal performance.

4. Summary

The document serves as a selection guide for rubber sustainers, detailing compression load capacities and deflection limits for various models. All models share consistent minimum and maximum deflection limits but differ in load capacity and total deflection range. This information is critical for engineers and technicians to select the appropriate sustainer for specific mechanical or structural applications.