SeGMo-Motion Compact positioning drive GEL 6108for cyclic operation Technical information General The SeGMo-Motion GEL 6108 forms a compact mechatronic unit comprising a DC brushlessmotor, a 32-bit microprocessor, a compact power amplifier as well as a spur gear with a nominal torque of 0.4 Nm. The SeGMo-Motion GEL 6108 is suitable for cyclic operation at 0.25 Nm, 50 % duty cycle and a cycle time of 1 s. This positioning drive is equipped with a robust, incremental measuring system. The position of the shaft can be referenced once per turn via an optional proximity switch input. Active system protection against thermal overload and comprehensive system software ensure durable operation. Features ■ Spur gear: 0.4 Nm nominal torque (duty cycle 25 %) ■ Stainless steel housing, glass-bead blasted, Viton sealed ■ Operating temperature At ED 25 % with 0.4 Nm: 0 °C to +60 °C At ED 50 % with 0.25 Nm: 0 °C to +50 °C ■ DCBL motor ■ Hybrid cable outlet ■ CANopen DS 402 ■ High protection class IP 67 ■ Gear service life Advantages ■ Suitable for cyclic operation at 0.25 Nm and ED 50 % and 1 s cycle time ■ Flexible installation variants make cleaning of all external parts straightforward ■ Maintenance-free due to sealed-for-life lubrication ■ Straightforward installation matched to the application Fields of application ■ Packaging machines ■ Food and bottling plants ■ Wood and plastic working machines Right to technical changes and errors reserved. Internet: www.lenord.com E-Mail: [email protected] Phone: +49 208 9963-0 Lenord, Bauer & Co. GmbH Dohlenstrafte 32 46145 Oberhausen, Germany

Construction The positioning drives in the series GEL 6108 are intelligent mechatronic units for attachment to solid shafts. The installation of the GEL 6108 is flexible and is adapted to the application. For easier cleaning of the external parts, rotating or removable housing mounting is possible. The stainless steel housing is glass-bead blasted and laser welded. Equipped with a Viton shaft sealing ring, the GEL 6108 meets protection class IP 67. The GEL 6108 provides a nominal torque of 0.4 Nm at 750 min-1 via a compact spur gear. In cyclic operation it provides a torque of 0.25 Nm with a...

(2) Use only screened cables. (3) Optional, see type code: Option package

Male coupling (1) Configurable connecting cables are available for the connection, see "Technical information BZK". (2) Optional, see type code: Option package

All dimensions stated in mm Grey: pressure equalisation valve option inside diameter 6 mm, material stainless steel 1.4301 M5 x 25 mm, material V2 A, welded to the underside of the housing The receptacle and mounting for the housing must be provided in the system. The positioning drive does not have a separate earth connection, earthing is via the torque support. Other torque supports are available upon request.

Type code GEL 6108 Nominal torque 04 0.4 Nm / 750 min-1 at duty cycle 25 % I Shaft [in mm] A Solid shaft, outside diameter 5 mm I Housing E Stainless steel 1.4301 I Torque support 1 Sleeves, 2 pieces, inside diameter 6 mm 2 Studs, 2 pieces, M5 x 25 mm I Hybrid cable/connector xx Hybrid cable with flying lead, length of the cable in m, 03 minimum length 3 m, 20 maximum length 20 m H1 Hybrid cable (length 30 cm) with M23 connector, male coupling (1) H2 Hybrid cable (length 50 cm) with M23 connector, male coupling (1) H3 Hybrid cable (length 100 cm) with M23 connector, male coupling (1) Hx Hybrid...

/ fcLENORD > +BAUER Lenord, Bauer & Co. GmbH DohlenstraGe 32 46145 Oberhausen, Germany Phone: +49 208 9963-0 Fax: +49 208 676292 Internet: www.lenord.com E-Mail: [email protected] Right to technical changes and errors reserved.